Unless you have a hydraulic press and strong knowledge of how to remove it, I suggest you go to a parts store and buy the whole hub assembly and replace the whole thing.
It is a sealed hub assembly
SOURCE: Change front wheel bearings
u will need to remove the brake cailper and the the brake rotor, then the hub retaining nut, that is a large metric nut, the bearing and hub must come off, then u will need to take this hub to a machine shop or the dealer and have the new bearing pressed in.
BCA/NATIONAL Part # 510078 
{Ball Bearing Bore=1.5354" Outer Diameter=2.9134" Width=1.4173"}
Front Wheel PRICE: $47.99, PART SOURCE: Rockauto.com
SOURCE: chey aveo front hub bearing what is this?
yes front wheen drives have hub bearings. Most of them need the hubs to be pressed apart to replace them. the hub bearing supports the end of the CV drive shaft closest to the wheel. hope that helps.
SOURCE: 2004 Aveo roaring noise from front and rear wheels that
wheel bearing or cv joint . remove brake caleber remove spindel nut outer bearing comes out easy inter bearing is is a little harder
SOURCE: I need to change right front wheel bearing on 96 honda accord
It's not a easy job you will need a press to take the old one out and replace the new one, my advice to you is take the steering knockle out and have your local shop press the bearing out for you and put the new one in. This way you just have to bolt everything back up and your good to go.
SOURCE: I am replacing front wheel bearing on a chevy aveo
if you mean the big nut in the middle then thats easy just use a 32mm socket ,your aveo is the same as the ones we have here and iam always changing drive shaft gaiters as they are a vehicle inspection failure here in spain
354 views
Usually answered in minutes!
×