Dec 31, 2009 - Shouldn't that be 6015 ~ designating that it is an engine block? ... Part numbers do not change every year, they only change when the part is revised. e7te blocks used the same part number ... What would a block with casting # F1SE and E7TE heads be from? ...... 3 Attachment(s) New CCW Vortech JT-B.

The Ford 289 and 302 Engine Block

www.mre-books.com/interchange/interchange2.html

At this site you can find information about Ford small block cylinder blocks and interchangeability. ... and 302 engines were never identified as "Windsor" small-blocks by Ford Motor Company. These ... Block identification is straightforward. ... Beginning in the 1965 model year, the 289 had a .... factory casting numbers, etc.

Geeks On Cars: How to Identify Small Block Fords

Read full answer

Dec 26, 2015 • Cars & Trucks

0helpful

2answers

Where is engine number on block

Hi try on the side of the block just below sparkplugs

Read full answer

Mar 17, 2015 • Cars & Trucks

0helpful

1answer

Anyone there?what year vehicles and what size engines will fit into a 1998 olds silhoutte?

Here's a link to where the engine numbers are. Repair Guides Serial Number Identification Engine Number AutoZone com

Read full answer

Jan 10, 2015 • 1998 Oldsmobile Silhouette

0helpful

2answers

Gm motor identification

You will have to find the casting number on the block, heads, and intake to see if all those are original to that motor, but the block casting number will tell you what year it was made, and the types of vehicles it was used in. It might be difficult to pinpoint exactly what it was in originally if they used it in more than one type car, or produced it more that one year. You can google up a site that will help you find the block casting and decode it for you. Just type in GM engine block decoder

Read full answer

Jul 17, 2014 • Chevrolet Impala Cars & Trucks

3helpful

3answers

LOCATION ON ENGINE NUMBER OF KIA SPORTAGE 2005 MODEL

Find the engine identification tag. Attached at the factory, this tag is normally found on the engine block around the coil bolts. The top line of the tag identifies engine size and model year.

Search the block for the engine block casting number. The numbers are raised, not stamped into the block and consist of seven numeric digits. The digits can be located on either side of the block. The seven-digit number may be followed with a dash and further numbers. These are change codes and are not normally necessary to identify the engine.

EX.:

Locate the casting date is located on the block. It is in standard date coding, 2.25.93, for example and may be located on either side of the block, but is commonly located on the driver's side of the block, above the freeze plugs. The example 2.25.93 decodes as February 25, 1993. The casting date may be near the casting clock, which designates the hour the block was cast. Magnum engines were manufactured from 1993 to 2002, so verifying the date code helps identify the engine.

Read full answer

Jan 15, 2011 • 2005 Kia Sportage

0helpful

1answer

What are the engine codes and what do they stand for? ie: Y= 400 C.I. engine,325 h.p.

What kind of Pontiac engine you have? Is it pre-80's? Pontiac engines have a 2 letter stamp on the front top passenger corner of the engine block. The year is usually next to the distributer hole, and the actual casting number is located on the top rear of block. Some sites offer casting number searches. A good one is wallaceracing.com. They deal with everything from block and cylinder head numbers. If the engine is 1970 or newer, engine size is casted behind the dipstick passenger side of block and also on the front driverside of block too. There are many different variations of codes to list. A example it the engine is made in 1967, casting number is 9786133, code on the right front of block says YE, then it's a 1967 400, that originally had a automatic transmission connected to it, had 10.5 to 1 compression, #066 camshaft, 143 or 061 cylinder heads, 4bbl carb, and 325 horsepower.

Read full answer

Dec 19, 2010 • Pontiac GTO Cars & Trucks

2helpful

4answers

I have the # that is stamped on my engine block and was wanting to know what size engine it is ? engine block # is 3970010

Those casting numbers would indicate the engine is a 350

Read full answer

May 17, 2010 • 1983 Chevrolet C2500

Not finding what you are looking for?

View Most Popular

Cars & Trucks

Block and Head casting numbers. What do I have please?

Cars & Trucks

48 views

Ask a Question

Usually answered in minutes!

Check Out the Latest Top Trucks Report!

View all Fixya Reports

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual

Related Topics:

Engine block number 1551761 what year is this engine?

Add Your Answer

Attachments: Added items

Related Questions:

Block and Head casting numbers. What do I have please?

3789935 Detail - Casting Numbers .info: engine blocks, heads ...

Fs 283 Block Casting 3789935 - CorvetteForum

1961 Chevrolet 283 Engine Block 3789935 - eBay

Block Casting Numbers ' Chevy Tri Five Forum

2001 Jeep Cherokee XJ 4.0. Where is the engine number?