How to bypass the neutral safety switch on a 2000 Chevy Silverado Z 71 4 x 4

The neutral safety switch is an important component that prevents the engine from starting unless the transmission is in the neutral or park position. If you no longer have the switch, you can bypass it by jumping the starter relay. This can be done by connecting the two wires that would normally go to the switch directly to each other.
Here's how to do it:

1. Locate the starter relay in the underhood fuse box or the power distribution center.
2. Find the two wires that would normally go to the neutral safety switch. These wires are usually color-coded and easily recognizable.
3. Using a jumper wire, connect the two wires directly to each other.
4. Turn the key to the "on" position and see if the engine cranks.

Note: Bypassing the neutral safety switch can be dangerous as it eliminates an important safety feature. It's also ******* in some states and can void the warranty on your vehicle. Consider using the bypass as a temporary solution until you can obtain and install a new neutral safety switch.

Ford Windstar bypass safety switch Questions & Answers (with ... - Fixya

www.fixya.com > Forum > Tags > bypass safety switch > Cars & Trucks > Ford

Ford Windstar cars & trucks bypass safety switch questions and answers. ... 2000 ford windstarwon't start after changing safety neutral switch? ... ...neutral switch on a 1997 ford taurus I`m looking for the netural safety switch` have replaced ...

No, no.

Bypassing Neutral Safety Switch, Chrysler sebring 2000 ...

? 2:21
https://www.youtube.com/watch?v=uBszX3CnXeo
Apr 27, 2012 - Uploaded by Brianna Kufa
Bypassing Neutral Safety Switch, Chrysler sebring 2000. Brianna Kufa ... 1) Remove wiring harness attached to tranny. (there's 4 connections: ...

Part 1 -How to Troubleshoot a No Start (Chrysler 2.0L, 2.4L)

troubleshootmyvehicle.com > Chrysler > 2.0L, 2.4L

Dec 29, 2012 - Failed starter motor. Failed neutral safety switch. ... Dodge Vehicles: Avenger. 1995 ... Stratus. 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002.

Automatic Shutdown Relay - Allpar

How to Bypass neutral safety switch - YouTube

? 2:15
www.youtube.com/watch?v=poLZ7od9vCM
Apr 7, 2014 - Uploaded by Fix Your Car Videos How to Bypass neutral safety switch is easy. ... I get the part where you hook up a positive wire to the push button but where.... Neutral Safety Switch Replacement 98 Silverado (full size GM trucks) ... Bypassing Neutral Safety Switch, Chrysler sebring 2000 - Duration: 2:21. by Brianna Kufa 36,694 views.

I assume manual? There should be a switch at the clutch pedal

i have a 78 chevy and mine is at the bottom of the steering colomn right at the fire wall

It could be the Neutral Safety Switch or Trans Range Switch located on the side of the trans where the shifter cable attaches. Check it and see if the wiring plug has been hot or deformed. I would have it checked first. Don't just go buy one and toss it on because I said to check it. I don't want you to waste money guessing.

Hi Is a waterpump on a L300 4wd balt driven ?

If it looks like this:





It is mounted on the side of the tranny. It also says a special to remove it.