Cars & Trucks Logo

Related Topics:

Cindy Burgess Posted on Aug 19, 2015
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Where is the fuel pump and filter located on a 1985 Ford Crown Victoria with a 5.0

Car died while driving, towed home, cranks but will not turn over. Parts house said I might have two different pumps either an in line electric or in tank. Any suggestions or diagrams would be great.

1 Answer

Claude Kayser

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

  • Ford Master 9,098 Answers
  • Posted on Aug 19, 2015
Claude Kayser
Ford Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

Joined: Jun 15, 2015
Answers
9098
Questions
0
Helped
5065974
Points
28436

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2003 crown victoria cranks wont start, was running fine, just cut out.never started again

As with any no-start situation, you need to know if you have spark to the plugs, fuel to the injectors, and normal compression to proceed.
0helpful
1answer

It have a 1994 crown victoria it ran out of gas I put 5 gallons of gas in it, when I turned the motor over it started right up, it ran for about a minute and a half then quit. I changed the filter, checked...

Air in the fuel line. Take one small wire off the starter relay and turn and hold the key in the start position for a while. Listen for the fuel pump. It will run fast for a second then slow down. When it does, put the wire back on the starter relay and crank the engine.
1helpful
1answer

Somthing is shutting my fuel pump down before the car cranks

Fuel pressure regulator may be bad,is normally located at the end of fuel rail.
let me know if this helps
0helpful
1answer

1985 crown victoria stalls out

Why not hook a fuel pressure gauge up to it & see what the pressure is ?? Am I missing something here?
0helpful
1answer

How do i know if the fuel pump is working on my 1988 ford crown victoria and if needed, how hard is it to change?

You can tell if the fuel pump is working when you turn the car to the "on" position, not cranking it over, but just on, you should hear the pump prime.

Im not sure how hard they are to change however, if it's an in-tank filter, you need to drain, and drop the tank to change it.
1helpful
1answer

Car dies when accelerate. do i need new fuel pump?

Hello;
It sounds from your description that the fuel pump is weak. To check the fuel pressure you need a fuel pressure test gauge for fuel injection. Attach the gauge to the test port schrader valve and turn the ignition to the on position. Record the reading. Now start the engine and record that reading. Unplug the pressure regulator vacuum line and record the reading.
The pump should have pressure with in specs but if low, start with the installation of a new complete pump. It is located in the fuel tank. Also replace your fuel filter.
Hope this helps you.
Thanks;
Rich
RPM Northwest
0helpful
1answer

2005 Crown Vic Police Interceptor: Starts then stalls

Have you checked the fuel filter. Fuel pump will pressure up, but fuel filter could be clogged and not work without the pressure of the fuel pump.
2helpful
4answers

Where is the fuse panel on a 1985 Ford Crown Vic located?

Local Ford dealership service department provide answer on location of the fuse panel. Fuse panel is located directly under the steering column. The cover panel is held by two screws and the power antenna swithch locking ring must be removed.

thank you all for you assistance,
Not finding what you are looking for?

571 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...