Cold,here's how to do it if you need help,click on link. Repair Guides Engine Mechanical Components Cylinder Head AutoZone com
Torque it when cold if you start it to warm it up you will damage not only the gasket but can add major damage to engine
Cold,b4 it is run or you will blow it out
If you overheat an engine with a cast iron block and an aluminium head, they will expand at different rates as they have different expansion coefficients. This will usually cause separation of the gasket and if you are losing coolant, it's a near certainty. The answer is a new gasket (pennies) plus a head skim at a local engineering shop, $100 or so (otherwise it won't seal again). You need a torque wrench and a workshop manual to check the torque settings and slackening/tightening order if doing it yourself, otherwise you'll cause further warping of the head. If the head isn't skimmed, it will go again after 50 miles or so.
132 views
Usually answered in minutes!
×