You dont torque a valve cover,hand tight or you crush the gasket
SOURCE: Saturn SC 98 valve cover torque specifications diagram
you can look up repair guides on autozones repair section, but when i replaced my valve cover on my 98 saturn sc2, I did a alternating star patern like on a tire, and I just tightened it down till I saw the seals from the spark plug wholes plump out just a lilte. I have no leaks and no problems. The torque speks in the book are in inch pounds not foot pounds. So I just did it on my own.
SOURCE: Where is the drain valve on 2002 dodge caravan radiator?
its a pitcock facing the cab bottom of the radiator, plastic flat. once you find the pitcock just put a bucket underneath and turn it.then refill. if you want to flush(run fluid thru to clean it out) the radiator id suggest taking it in. you dont have to flush it every time you change the coolant out.
SOURCE: 98 dodge caravan oil leak
Check were the oil filter screws on to the housing. Make sure the seal don't need replacing on the housing.
SOURCE: 2006 Grand Caravan: Can't get pcv valve from a 3.8 dodge grand caravan...
I just replaced mine and had the same problem. If you look at the new one, you should find a small hole at the base of the metal tube. Using a mirror, I located the same hole in the one in the valve cover and inserted a pointed awl into it and was able to pry it out. Do it slowly since you are prying against plastic. When inserting the new one, I found that it should not be inserted as far the original one was and has a gentle snap.
219 views
Usually answered in minutes!
×