Saturn Wire information - Wirediagram.com
www.wirediagram.com/saturn.htm
On Google
SOURCE: replace ignition switch and kew switch
***As per Haynes Manual for your Vehicle*** Warning: if your vehicle is equipped with a suplemental inflatable restraint (SIR) system, always disengage airbags before working in the vicinity of the sterring wheel to avoid accidental deployment of airbags.
1. disconnect the negative cable at the battery
2. Remove the steering wheel if it interferes with the access to the steering column covers on your vehicle. Remove the steering column covers.
3. Unplug the wires from the ignition switch, remove bolts and lift the switch off the steering column.
4. Installation os the reverse of removal.
Hope this Helps! I have a an illustration and it looks that the switch is on the left side of the steering column. If you need any information or help removing the Steering wheel or steering column covers let me know! Good Luck.
SOURCE: 1993 Saturn SW1 station wagon
is it a way to change the clutch without droping the transmission
SOURCE: my mechanic is trying to reset the computer on our
Pull your fuse in your ECM in the fuse panel with the ignition keys to the on position. (engine not running) for 2 in and place back in place. Turn the ignition switch off and turn back to run position for 2 min then start the car.
The car may stall at first, but let it and don't touch anything. Just restart it again an let idle for 5 min or when the RPM drops to normal range and then go for a test drive.
Thank you for using fixya and be safe.
SOURCE: how to reset my key fob for a 2000 saturn
The only reset is if the key fob and the receiver get out of sync, to check that be out side of the car doors closed and unlocked. Press both lock and unlock buttons on the remote (key fob) at the same time if the doors lock and unlock that was your problem. It could be the battery it could be the key fob or the receiver.
207 views
Usually answered in minutes!
×