Engine starts but why won't it stay cranked?

SOURCE: trunk release and fuel door release buttons do not work

i just bot mazda millenia and i can't find trunk release???!!!!

SOURCE: lock, unlock and keyless starter problems

The fob can get dirty inside reducing it's function. You can clean it inside with electrical contact cleaner. Your dealers parts department can test it, usualy for free. Good Luck

SOURCE: trunk release and fuel door release buttons do not work

cable knocked loose and key wouldn't work if it did previously. last option, obtain acess from back passenger seat and pull aux cable or force lock open, as far as the key issue, call a locksmith

honeymokey

• 3113 Answers
• Posted on Jul 02, 2009

SOURCE: my car won't start, battery charger says its fully

Disconnect battery cables and clean them.

michael schultz

• 1068 Answers
• Posted on Nov 21, 2009

SOURCE: i have a 2000 grand am and right now it wont

well it has passlock two and this is common with these cars. never seen the other issue to accompany it but if you do a relearn of the key and it starts then it could be two different issue's but if it don't work then they are related.

a relearn of the key is done with the ebrake up to keep the day time running lights off ( not an issue for you) but do it anyway. put key in the ignition and turn it to the on postion right before crank for 10 sec. turn it off for 10 sec. then turn it back on for 10 mins. repeat two more times back off for 10 sec. and then back on for 10 mins. it is cruishle you try to keep with in the times or very close. 10 seconds and 10 minuites three times and that will relearn the key and if it starts then you may have two issue's but hard to tell with out testing. but i think this is the best thing you can do for now.

i have a customer that can't afford the passlock module and labor so i taught her this and she is better then me now at it. lol... but like i said very common issue. let me know if you have any more question. good luck