All other lights ok, hazard works, all fuses ok. could flasher unit cause this?
Test the arn?s on the light side. If you got juice there . Then replace the hole deal. If you dont get anyrhing. The is your turn anddle stick.
Would help if you supplied year, make, model and if anything happened prior to the problem being noticed.
First, you can check the fuse. location varies by car. Use a test light and if you power on both sides, check to see if you have power at the flasher relay.
Second, flasher relays tend to short to power. Location varies by car. You can also use a test light to check power going in and coming out of flasher. Power out is checked by slightly pulling the relay out enough to put test light probe in contact terminal.
NOTE: depending on year, make and model the flasher reply is part of the Hazard light switch.
Good luck and keep us posted.
Testimonial: "flasher unit cracked , problem solved"
172 views
Usually answered in minutes!
×