You will need to remove the outside panel to service the window or window regulator or the window motor. The outer panel is held in place with a dozen or so bolts that a male torx socket is needed to remove. You will first remove the trim piece that is on the upper back of the outside of the door, two screws. Then remove the window seal on the outside of the window. Then remove the outer door handle. Then remove the torx bolts and lift up on the door skin, you may have to wiggle a little to get it to pop.
The video is for an S-Series but the principal is the same. Good luck!
I’m happy to assist further over the phone at
https://www.6ya.com/expert/jeremy_d728a59f986299fa
×