-
Expert
268 Answers
- Posted on Jun 17, 2015
Re: how to replace fan belt on a Mitsubishi pajero
Instructions
- 1
Open the bonnet of the Pajero, and turn the bolt on the centre of the tension pulley with a socket wrench two full rotations. The tension pulley is the pulley directly behind the fan in the upper portion of the front of the engine.
- 2
Loosen the adjuster bolt on the tension pulley bracket. This bolt is on the left-hand side, situated in a long horizontal groove.
- 3
Slip the fan belt off of the engine. Draw a diagram of the path of the fan belt if the factory printed sticker diagram is no longer in the front of your engine on your Pajero.
- 4
Insert the new fan belt, winding it through the various pulleys according to your diagram. Put it on the tensioner pulley last.
- 5
Place the tension belt tool on the tension pulley bolt and pull until the slack in the belt is gone. When there is no slack, keep the pressure on the pulley, and tighten the adjuster bolt with the wrench. Tighten the lock bolt on the pulley.
×