How to take off door panel of a 1996 GMC Yukon

SOURCE: I have a 1996 GMC

THERE IS A INTERGRAL MICROSWITCH INSTALLED IN THE LF DOOR LATCH- DOOR SIDE. THIS PART IS NOT SOLD SEPARATLY, THE SWITCH WILL NEED TO BE REPLACED. MAKE SURE THERE IS A POWER & GROUND AT THE SWITCH 1ST. IF NOT THEN THERE IS A PLOBLEM WITH THE WIRING HARNESS TO THE SWITCH..

honeymokey

• 3113 Answers
• Posted on Jun 13, 2009

SOURCE: Removing passenger door panel

There is a screw behind the lock rod. Lift door panel straight up to remove

SOURCE: 1996 GMC YUKON TRANSMISSION PROBLEMS

$1000 shipped or $1100 installed 1 yr warranty www.TransmissionGarage.com

SOURCE: 1996 GMC YUKON PROBLEMS

sounds like to me your catilac conveter is clogged up or your have a build up of crud in your fuel injecters

Jose Cada

• 3530 Answers
• Posted on Aug 21, 2011

SOURCE: How do I remove the

Welcome to Fixya

Disconnect the negative battery cable first to ensure your safety. You will see a small trim panel a few inches above the interior door handle (behind the armrest). Pry off the panel with the trim panel tool or a flat-head screwdriver. Remove the two 10 mm bolts that are behind the small trim panel. Pry off the vertical trim panel mounted on the handle that connects the power window controls and the door panel. Once the panel is removed, use the socket wrench to pull out the two bolts behind it. Pry off the small plastic piece around the door lock tab (upper part of door handle). Once the piece is removed, detach the door lock tab with your hand. Unfasten the sail panel using the trim panel tool or the flat-head screwdriver. The sail panel is on the corner of the door panel, directly across from the outside mirror. The panel is only attached by clips. Pull your interior door handle toward you, and pry off the trim panel behind it. Remove the bolt made visible with the panel removed. Pry up the power window control panel. Then unhook the electrical harness from the rear of the panel. Use the door trim tool to unhook the door panel clips. Insert the tool between the door panel and the door, and release the clips. There are several clips on each side of the door panel. Push the door panel up, then pull it away to remove it from the door.'

Thank you for using Fixya!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...