At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Engine vibrates at start of acceleration also when AC is on a little bit of gas ans runs fine code P0401(insufficient EGR flow) I think it is not related
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
OBD-Codes.comhttps://www.obd-codes.com > forums > viewtopic
Jan 20, 2007 - on EGR codes, we recommend replacing the EGR, vacuum modulator and VSV (if equipped) and cleaning out the carbon buildup to the intake from the ...
If that finds nothing wrong, remove the EGR valve and bypass tube and check them for cleanliness and blockages. If they are blocked, follow your maintenance manual's instructions for cleaning them out so you do not damage the valve, then replace them and reset the ECM.
The EGR valve is in a very difficult spot to work on. If the EGR is bad it will set off the check engine light and make the vehicle run rough or stall at idle. It really doesn't make it run rough while driving or accelerating. What are the conditions when the car runs rough?
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR. You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms.
A code P0401 most likely means one or more of the following has happened: The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced There is a blockage in the EGR (tube), most likely carbon buildup The EGR valve is faulty The EGR valve may not be opening due to a lack of vaccuum
Check it and keep us updated. Hope this helps (remember to rating this free answer).
p0401 is egr flow insufficiant. check or remove and clean egr and port. and also check the vacuum lines to egr. Insufficient EGR flow frequently is caused by clogged EGR passageways.
P0401 OBD-II Trouble Code Insufficient EGR Flow What does that mean?
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor (DPF). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.
The "pd" after the code means that the code is pending. Meaning that the ECM recognized a problem but is identifying it is inactive. You can gather that the problem is intermittent. P0401 means: Exhaust gas recirculation flow insufficient. This code has something to do with the EGR system. The EGR valve may be defective of something else within the system is restricted or is clogged and thinks that there is a restriction. Without a scan-tool you will be limited to what you can do or test but you can remove the EGR valve and inspect it for carbon buildup. But you may also want to inspect the vacuum lines and MAP sensor too. Faults in those areas can affect the performance of the EGR system. So be thorough.
The egr valve has insufficient flow, take it off, or have it taken off, and clean the under side of it, there might be a port clogged, or the diaphram inside is leaking, in which case the valve will need replacing.
×