Question about 1995 Mazda Protege

Open Question

Where is slave cylinder located on my 1995 mazda protage dx/lx

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 145 Answers

SOURCE: misfire cylinder 00 mazda protage

Could be a defective plug or clogged injector What cylinder was IDd. Isolate the problem cylinder swap the plug from a good cylinder see if the miss moves with the plug,if not try having the injectors cleaned. That should get the zoom zoom back.

Posted on Apr 17, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: 95 mazda b4000 slave cylinder bleeder valve location

the nipple sticks out side the bell housing on the left side just above your hydralic line for your clutch,auto zones web has a complete diagraham and steps for bleeding

Posted on May 09, 2009

Melissa Haskell

  • 161 Answers

SOURCE: 1995 mazda 626 lx when accelerateing engine light off then on

02 sensor or a list of other things. Have a tech hook it up to a testing unit and see what code it gives off.

Posted on Sep 26, 2009

Anonymous

  • 13 Answers

SOURCE: Where is the Clutch Slave Cylinder located on a

left of master cly

Posted on Nov 28, 2009

SOURCE: where is the EGR valve lift sensor located on my

it is on any one fuel injector who having a wire on it or it will look differant from others. thanks.

Posted on Jan 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Slave cylinder


Should be mounted on the transmission bell housing. Follow the line from the clutch master cylinder. It goes right to the slave cylinder.

Dec 19, 2013 | 1999 Mazda B2500

1 Answer

2002 protage 2.olt hasites under load but clears up after 3000rpm


You are dealing with a misfire.It clears up at 3000.RPM A jump timing belt can do this or a broken valve . Also a failed coil pack. Lets go with a failed coil pack.Because of the strategy that is used a failed on the engine smooth at 2000RPM (neutral) No. 1 and No. 4 are fire simutaneously and No. 2 and No. 3. simutanueously. with the engine running lift the plugwire to number 4 does the engine stumble if it does this is the working cylinder and there is nothing wrong go to number 3 you may have to use number 2 engine running wire pulled out does the engine stumble if there is no change you found the problem.Basically what yopu are doing is checking for spark at all the cylinders

Feb 23, 2012 | Mazda MAZDA5 Cars & Trucks

2 Answers

My clutch pedal has gone/broken, not functioning.


if it is going straight to the floor it is probably your slave cylinder, it is located on the side of the transmission and is fairly easy to replace.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/michael_00678fd4800d19c5

Feb 25, 2011 | 1995 Mazda B-Series

1 Answer

What is the firing order on a 3.0


For the 2002 Mazda Tribute 3.0L DOHC V6:
Same for all 3.0L on DX, ES LX, 2WD, 4WD:

Firing Order:
1 - 4 - 2 - 5 - 3 - 6

Cylinders:
........(back)........
|...1.....2.....3...|
.........................
|...4.....5.....6...|
........(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Jul 10, 2010 | 2002 Mazda Tribute

2 Answers

Where is the fuel filter located on a 2001 Mazda Protege 2.0 LX?


A 2001 Mazda Protege (actually, all models from 1999-2003 including the DX, LX, ES, Mazdaspeed, and Protege 5) does not have an inline fuel filter. The only fuel filter it has is a "strainer" or a "screen", which looks like a nylon mesh "sock". This strainer is connected to the fuel pump, located in the gas tank. Although this fuel strainer does not require periodic replacement, it is recommended that it be changed if you are replacing the fuel pump.

Jun 15, 2010 | 2001 Mazda Protege

1 Answer

Misfire cylinder 00 mazda protage


Could be a defective plug or clogged injector What cylinder was IDd. Isolate the problem cylinder swap the plug from a good cylinder see if the miss moves with the plug,if not try having the injectors cleaned. That should get the zoom zoom back.

Apr 17, 2009 | 2000 Mazda Protege

2 Answers

95 mazda b4000 slave cylinder bleeder valve location


the nipple sticks out side the bell housing on the left side just above your hydralic line for your clutch,auto zones web has a complete diagraham and steps for bleeding

Jun 17, 2008 | 1996 Mazda Pickup

Not finding what you are looking for?
1995 Mazda Protege Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...