At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like the high pressure power steering hose is leaking. Check it out and if so replace it along with the low pressure return line. If the lines are not leaking then the power steering pump could be the problem.
you need to bleed the rack. you can try to turn the steering wheel to the left and hold for 5 sec and then to the right and hold, continue this a few times check fluid and repeat. you can also try to loosen line on rack and turn wheel to bleed air out then tighten before turning wheel again.
As mentioned check ps fluid. If it wines when turning and still no power then the pump is internally bad.. If the fluid is dissapearing fast then its a hose or most likely a leaking rack& pinion assembly..
check the power steering pump, if its good than it will be rack and pinion issue. the pump create a high pressure to help assist with steering, and the rack and pinion work like hydraulic cylinderwhichreceive the pressure from the pump and the steering work like control valves. by turn left or right you controling the pressure to make the wheels turn either right or left. check and see if you have any leaks.
YOU CANT USE A REGULAR FUEL LINE ON POWER STEERING AS A HIGH PRESSURE HOSE.BECAUSE POWER STEERING PRESSURE IS 1000 PSI.YOU HAVE TO BUY THE POWER STEERING HIGH PRESSURE HOSE IT HAS NUMBER OF PLIES MATERIAL WEAVES TO MAKE IT STRONG.IT WAS MADE FOR POWER STEERING HIGH PRESSURE.YOU DONT HAVE A BLOCKAGE .THE HIGH PRESSURE HOSE JUST WORE OUT.REPLACE IT .IT SHOULD FIX THE PROBLEM.
they are bad about pumps leaking into alternatorand shorting out .the high pressure hose from pump to rack and pinion are also bad about leaking. the racks will leak around 100k.
×