Question about 1996 Jeep Grand Cherokee
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The little blade lock will lift up. see image..."http://econtent.autozone.com:24991/znetrgs/repair_guide_content/en_us/images//0900c152/80/0a/9d/4c//medium/0900c152800a9d4c.gif"
Posted on Sep 30, 2008
Unfortunately, could not find owners manual for 1996.
Website only has models 2004-current
There are two fuse boxes. One under driver compartment usually left to the steering colum. A label is stamp to identify each fuse. I would look at Park Lights and Instrument Cluster fuses. The easy way is to take a flashlight and look at all fuses. If they are all okay. Then just remove the Park Lights and Instrument Cluster fuse and reseat them. The other fuse box is under the hood and near the batter. It also has a label to identify each fuse.
Posted on Dec 24, 2008
C1 & C2 in your panel are most likely one of the culprits, if no power at heater at seat. Sounds like testing for power at seat switch is easier to do than get at these circuit breakers in the panel. If you have power at switch at seat, then it's not the fuse/circuit breaker. Good reading at this link for you.
Posted on Dec 29, 2008
If you have the owner's manual look up fuses in the index, good illustration. If you don't, I do. It shows a relay and a 15 amp fuse. Look at the passenger kick panel, pull the cover, and it is #2 fuse (second from the top on the left) The see the relay you may have to pull the panel (two screws and a clip) the relay is the third cavity down, third row from the firewal side.
Let me know if this works for you?
Posted on Apr 03, 2009
The idle air control valve is located on the back of the throttle body. It has an oval electrical connector and two torx screws holding it in. Unplug the connector, remove the two screws then lightly tap the body with a soft faced mallet to loosen it from the body.
Once you have it out and prior to installing a new valve clean the seat inside the throttle body where the idle control fits. This must be very clean! Installation is in the reverse order.
To save some cash, pull the valve out and clean it with throttle body cleaner, this usually fixes the problem for quite a while.
Good luck and hope this helps.
Posted on May 28, 2009
Tips for a great answer:
Jan 16, 2013 | 2001 Jeep Grand Cherokee
Jul 06, 2012 | 2004 Jeep Grand Cherokee
Oct 06, 2010 | 1996 Jeep Grand Cherokee
Sep 25, 2009 | 1999 Jeep Grand Cherokee
Sep 19, 2009 | 2001 Jeep Grand Cherokee
Sep 08, 2009 | 1996 Jeep Grand Cherokee
Mar 30, 2009 | 2004 Jeep Grand Cherokee
Oct 23, 2008 | 1996 Jeep Grand Cherokee
297 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: