HEADLAMP BULB REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury:
NOTE : Avoid touching the bulb or letting the bulb come in contact with anything damp. Oil from your skin or moisture on the bulb can cause the bulb to explode when the bulb is turned on. If either comes in contact with the bulb, clean the bulb with alcohol or a suitable degreaser and wipe the bulb dry.
INSTALLATION PROCEDURE
IMPORTANT :
REMOVAL PROCEDURE
INSTALLATION PROCEDURE
SOURCE: need replace turn signal bulb
YOU HAVE TO THE FRONT HEADLIGHT HOUSING TO REPLACE THE TURN SIGNAL BULB.
Testimonial: "thanks"
SOURCE: front turn signal bublb replacement
The only real way to do this is to remove the headlight assembly. There are two T30 Torx bolts on the top brackets for the headlight - remove those. The third bolt is harder to see. In the top of the fender, down over the headlight, there is a round hole. Shine a flashlight down there and you'll see the third Torx bolt. Unscrew that and then use one of those $1 magnetic retrieval tools they sell at the parts store to pull the bolt out.
Once these three bolts are out, you can manipulate the headlight out of the front of the car. From that point it's easy to replace the bulb. Reassembly is the reverse of removal.
SOURCE: Replace front turn signal bulb on a 1998 Jeep Grand Cherokee
first remave the headlamp and then remove the marker lamp assy.
SOURCE: rt front turn sighal burned out - how to access bulb to replace
There is a latch to the Van's outside just insert a flat blade screw driver and the turn light assembly will swing toward the middle of the van.
Once open the lamps twist out.
1,101 views
Usually answered in minutes!
×