That really depends whos the manufactures at that time, you could call a motor shop, call the dealer, go to local auto parts store, ask the clerk, i things standard 3/4 to 1 inch, metric 22-25mm
service manual, may tell, local library.
www.ask.com/bolt_size_for_harmonic_balancer_1997_grand_prix_3.8l_vin1
15 MM or 18 MM, Not sure which one. Use a screw driver or pry bar to keep the flywheel from turn. You have to remove the starter. Wedge it in place on the flywheel gears. I do it by myself, but two people makes it easier.
SOURCE: harmonic balancer coming out.
You say the bolt is tight? then if that is the case the balancer out ring is comming apart, the balancer needs to be replaced
SOURCE: cannot remove harmonic balancer bolt on 96 honda (2.2L)
You may need an impact gun. If loctite was used, you will need a gun.
SOURCE: I need to replace my timing belt but when I tried
yes!! you need to pull the harmonic balancer !! and the center nut i do believe...is a 22 mm and yes you will need a puller
638 views
Usually answered in minutes!
I'm having trouble locating the flywheel info. I have repair manua for my car but it doesn't say what to do if accidently move it a little when removing harmonic balancer.
×