How do I take the ignition cylinder off of my 2007 Honda ridgeline

SOURCE: how to change a serpentine belt on 2007 Honda

You'll need a 1/2 inch socket wrench to fit on the inlet of the idler pulley. You'll also need an extension bar to lengthen the socket wrench because the wrench alone won't be long enough to reach. Apply pressure to the pulley to take the tension off the belt. Slide the belt off and then install the new one using the diagram under the hood as a guide. Check this thread for some photos:

http://www.ridgelineownersclub.com/forums/showthread.php?t=28138

SOURCE: Hi, I bought a 2007 Honda Ridgeline The radio

you can call honda if it is the factory radio.. if you give them the vin number they should be able to help you... once you receive it you should keep it saved somewhere because every time you disconnect the battery it will reset again... sometimes you can find the code in the owners manual or sometimes you get a little card with the code on it... good luck

SOURCE: in cab air filter

behind the glove compartment, you have to disconnect the box damper and remove the glove box stops, let the glove compartment hang down and the filter is in front of you in the evaporator housing behind a cover.

Testimonial: "the best info. keep up the great job no other web site gives out the right information "