What's the torque spec's for H100 cylinder head for d4bb engine

SOURCE: need torque specs for a 85 s10 chevy with a 2.5 engine?

here you go!

SOURCE: 94 mazda B3000 3.0L cylinder head torque specs

Step 1 torque to 59 ft pounds
2. Loosen one full turn
3. 37 ft pounds
4. 68 ft pounds

Use torque sequence below

SOURCE: need cylinder head gasket torque specs.

looks like there is special sequence to reassemble and tightening, a quick note replace any bolts that have two punch marks.tighten as follows: x x x x x 10 4 2 6 8 x x x x x 7 5 1 3 9 torque all down to 15 ft lbs torque to 30 ft lbs plus 90 degrees. Good luck!

SOURCE: I have 4.9L6 need torque specs for cylinder head

for cylinder head the torque is : step 1 55 ft-lb, step 2 65 ft-lb, step 3 85 ft-lb. Rocker arm stud nut or bolt is 17 to 23 ft-lb. and valve cover bolt 72 to 108 in-lb.

ZJ Limited

• 17989 Answers
• Posted on Aug 12, 2010

SOURCE: torque specs for cylinder heads 4.9 v8 engine (NOT

Fig. Cylinder head torque sequence-4.5L and 4.9L engines (not Nothstar, this is 4.6L)

1. Tighten cylinder head bolts, in sequence, to 38 ft. lbs. (50 Nm).
2. Tighten cylinder head bolts, in sequence, to 68 ft. lbs. (90 Nm).
3. Tighten No. 1, 3 and 4 cylinder head bolts to 90 ft. lbs. (120 Nm).