1995 Jeep Grand Cherokee Logo
Anonymous Posted on Jul 10, 2009

I would like to disable the factory anti-theft and security system on a 1995 jeep cherokee with the v-8

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 8 Answers
  • Posted on Jul 12, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Jul 12, 2009
Answers
8
Questions
0
Helped
9037
Points
21

According to the people at jeep it can not be disabled. WRONG!!!! here are the steps that work.
First you must pull the plastic off the front of the dash on the passenger side.
Behind the glove box you will find a metal box shaped compartment.
Inside that box is your alarm. DO NOT DISCONNECT IT YET!!!!!!!!!!
The most important thing is the jeep must be running before you disconnect the alarm.
Start the jeep and look at the little box and you will find one screw that is holding the alarm box in place. remove the screw and disconnect the wires going to it.
At this point you can turn off the jeep.
The reason you must have the jeep running is the computer shows it has an alarm in place and if you disconnect it while the jeep is not running it will shut down the jeep thinking it has been stolen.
With the jeep running and you disconnect the alarm it will not be able to send the code to the computer showing an alarm is in place and the jeep alarm will not cause you any problems ever again..
If you have questions about this just let me know at [email protected]

Anonymous

Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 2 Answers
  • Posted on Jul 10, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Jul 10, 2009
Answers
2
Questions
0
Helped
3565
Points
7

Use the key on the lift gate if it does not work on the driver side

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

PERMANENTLY DISABLING ANTI THEFT ON 1995 JEEP CHEROKEE

see this link
what makes you think its (anti theft)??
all jeeps made with Immobilizer, (VTSS/VTA its called then)
the cluster has lamp that tells you VTSS has imobilized the engine (cuts fuel)
if the immo lamp is on, then see below.
93 was first year, click hack 93-98
http://jeepdied.com/
if not glowing that immo lamp
that means its just a no start.

cranks but will not start has over 50 causes.
covered on same page but is called no start.

ZJ 1995

this is the VTA page 8q in the fsm
The Vehicle Theft Alarm (VTA) system is an available
option on Grand Cherokee models. This system
is designed to protect against vehicle theft by monitoring
vehicle doors, hood, liftgate and ignition action
for unauthorized operation. When unauthorized operation
is detected, the VTA system responds by sounding
the horn, flashing the headlamps, park and tail
lamps and providing an engine no-run feature. Following
are general descriptions of the features of the
VTA system. Refer to Group 8W - Wiring Diagrams
for complete circuit descriptions and diagrams

see that lamp below, this tells you what's up.

26166726-iznfychya1k5sjkhauts20c0-4-0.jpg the lamp glows key on to tell you Im alive and that im ok booting up. but then goes out to start car.
does it?
1helpful
1answer

How can I disable jeep grand cherokee security system

Hi Andrew:
The 1994 Jeep Grand Cherokee Laredo Anti-Theft System is equipped with Vehicle Theft Security System (VTSS). VTSS system monitors vehicle doors, hood, liftgate and ignition. If an attempt is made to enter or operate vehicle without proper disarming of system, vehicle horn will sound, headlights, taillights and parking lights will flash, and engine will be prevented from running. I have an '93 GC 5.2L V8...

The following wiring diagram and electronics circuit contains detail schematics of The 1994 Jeep Grand Cherokee Laredo Anti-Theft System. Herein you will find interconnection between electronics parts of the system such as body control module, auto headlamp light sensor. VTSS led, driver door module, passenger door module, cylinder lock switch, junction block, power distribution center, and grounding. Herein you will learn also how the Vehicle Theft Security System works, removal, installation, testing and troubleshooting procedures.

Try HERE and also, remember that here can find the Jeep Grand Cherokee Service Repair Manual.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.
0helpful
1answer

Jeep grand cherokee alarm system

The 1995 Jeep Grand Cherokee Laredo Anti-Theft System is equipped with Vehicle Theft Security System (VTSS). VTSS system monitors vehicle doors, hood, liftgate and ignition. If an attempt is made to enter or operate vehicle without proper disarming of system, vehicle horn will sound, headlights, taillights and parking lights will flash, and engine will be prevented from running.

The following wiring diagram and electronics circuit contains detail schematics of The 1996 Jeep Grand Cherokee Laredo Anti-Theft System. Herein you will find interconnection between electronics parts of the system such as body control module, auto headlamp light sensor. VTSS led, driver door module, passenger door module, cylinder lock switch, junction block, power distribution center, and grounding. Herein you will learn also how the Vehicle Theft Security System works, removal, installation, testing and troubleshooting procedures.

Try HERE and also, remember that here can find the Jeep Grand Cherokee Service Repair Manual.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.
0helpful
1answer
0helpful
1answer

How do you disarm factory anti-theft system on a 1993 Jeep Grand Cherokee

Nices Jeep model, I have the same year with 5.2L V8 engine; visti the next link to know details about 93ZJ-Secc-8Q-Vehicle-Theft-Security-System

Hope this helps.
0helpful
1answer

How do i reset the anti theft on my 1995 jeep grand cherokee limited

I suggest check the procedure for antitheft system in this link: Jeep-Grad-Cherokee-Anti-Theft-System

Hope helps (remember to rate this answer).
0helpful
1answer

Car won't restart. I think it has to do with the security.

Yep, its possiblke that you have any proboem with the THEFT system; check in this LINK information about disarm it: 1996-Jeep-Grad-Cherokee-Anti-Theft-System

Keep in mind that the Grand Cherokee '93 at '98 keep the same features 8I have '93 GC Limited and this procedure work for me).

Good luck (remember to rate and commene this answer).
2helpful
1answer

How to bypass the theft deterrent system in a 1995 jeep grand cherokee. I can start the vehicle, but it immediately shuts down.

Use your key to lock and unlock the rear hatch key cylinder and that will temporarly disable the factory theft system, allowing your jeep to start.
13helpful
1answer

1999 Grand Cherokee Limited Jeep anti-theft system had shut all electronics down and engine will not start. what can I do to reset the system....

The 1996 Jeep Grand Cherokee Laredo Anti-Theft System is equipped with Vehicle Theft Security System (VTSS). VTSS system monitors vehicle doors, hood, liftgate and ignition. If an attempt is made to enter or operate vehicle without proper disarming of system, vehicle horn will sound, headlights, taillights and parking lights will flash, and engine will be prevented from running.

The following wiring diagram and electronics circuit contains detail schematics of The 1996 Jeep Grand Cherokee Laredo Anti-Theft System. Herein you will find interconnection between electronics parts of the system such as body control module, auto headlamp light sensor. VTSS led, driver door module, passenger door module, cylinder lock switch, junction block, power distribution center, and grounding. Herein you will learn also how the Vehicle Theft Security System works, removal, installation, testing and troubleshooting procedures.

Try HERE.

Also, remember that here can find the Jeep Grand Cherokee Service & Repair Manual.
Hope help with this.
4helpful
4answers

I would like to disable the factory anti-theft and security system on my 1994 jeep Wrangler with 4 cylinder. It drains the battery when left in storage/not driven for 2 months while on vacation. Then when...

Try Turn your vehicle on, while its on unhook the alarm box from behind the dash. if you attempt to do this without the vehicle on it will not work. an other solution would be to ground the purple and yellow wire on the drivers side door
Not finding what you are looking for?

3,354 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...