How to adjust proton savvy clutch cable@ - 1999 Porsche Boxster

That sort of information is not available. If you want that, you would have to contact the factory, find the design team and get the archived technical drawings on that part.

Not sure how you think you are going to make one to spec, but you can just buy a new one.

https://www.google.com/search?q=gearbox+selector+spring+Proton+Savvy+1.2+manual

..

I thought to myself, "manual gear boxes don't have a neutral safety switch". The safety is that you have to use the clutch and the gear lever, whereas with an automatic, Park is your brake, if you are in Drive and the engine starts, the car will move forward due to the increased revs on start up. I have searched for 10 minutes using a few search queries and it bears out that one doesn't exist. No parts sold under 'proton savvy neutral safety solenoid' either.

https://www.google.com/search?q=%22proton+savvy%22+%22neutral+safety+switch%22+location

..

the synchro dog is not staying engaged for several reasons
worn teeth on the dog, , worn inlet shaft bearings , gear not going fully into gear from incorrect selector adjustment

It sounds like you need your timing needs adjusting/ good luck K...

Hi. Thanks for your question. For any assistance of issues related to proton savvy 1.2 model 2008 you can visit https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!

hi,
savvy engine is same with renault engine. there's a flywheel sensor/engine speed sensor between engine and gearbox. change the engine speed sensor.
The engine speed sensor is control the ignition timing, if the sensor can't read the 0' angle the engine won't fire up.

hi,
you need a scan tool to bleed the AMT unit.
actuatation test do all the test.

Check alt bat

proton savvy ...good little car but often wont start ...turns over , no start ...llock it ,eave it , come back will start . when doesnt , kick the clutch pedal in hard 2-3 times ...neutral start switch may be sticky .. put into neutral , depress clutch & brake ...then started !

Manual transmission does not change gears with transmission oil. If yours is the AMT type, get it scanned for error codes.If the problem is in shifting into R, get your clutch cable adjusted. Your clutch plate may have also worn out. If shifting is OK but the car just does not move, the gear linkage/cable may need adjustment. If all else is OK, the reverse gear in the transmission may have been damaged.