My mechanic told me my rear shocks were leaking and that was the reason the display was reading sev. stability system so I had the shocks replaced and the info. display still reads SERVICE STABILITY SYSTEM any advise here would be greatly appreciated
To start you have to run the codes from the stability control module, and once that's done then you can beging to look for the problem, only a tech II scanner can reset this module, also make sure all tires are the same size
Testimonial: "Thanks Mike I appreciate the help I think im gonna get me some diag. tools because im a mechanic myself (power sports ) and i feel pretty venerable after this."
SOURCE: service stability system
one of the four load stability sensors (one at each wheel suspention arm) has gone awry. Computer diagnostics (Advanced scan tool) will tell you which one. Suggest replace both on front or both on rear (whichever the case)
SOURCE: 2001 buick park ave. ultra service stability light on
It is part of the ABS wheel sensors.So yes it is part of the ABS system.
SOURCE: Service stability system message appears
i believe your vehicle has air ride suspension in addition to coil springs. i would check the lines that run from the air pump to the air bags. they will black lines that are located near each strut and will go to a pump that is located somewhere iether underneath the vehicle or inside a fender.
SOURCE: what does it mean when
You need to have your vehicle diagnosed and
repaired, any time, any Malfunction Indicator
Light comes on your dash
You have a possible issue with your ABS Braking System
Do not use it until repaired
462 views
Usually answered in minutes!
×