At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: The engine light comes on and flashes 9 or 10 times-...
This is the anti-theft system. TO bypass this: Insert key and turn to ON position Leave in on position for EXACTLY 10 minutes. As SOON as light turns off, start car.
This didn't work in my 2007 pacifica the check engine light flashed 10 tomes car won't turnover what the problem please text me at 4792166712This didn't work in my 2007 pacifica the check engine light flashed 10 tomes car won't turnover what the problem please text me at 4792166712
Do you have to turn it off and then try cranking or just finish turning it overDo you have to turn it off and then try cranking or just finish turning it over
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Car Won't Start and Security Light is On on Oldsmobile 88 ... key turns over enginebut fails to start some times..security system keeps the fuel injectors from ...
Car Won't Start and Security Light is On on Buick LeSabre. Problems with the ... 1998 Buick LeSabreVisitor. Turn key on every thing come on but won't turn over.
Replaced trans, engine, PCM and bcm, now starter diabled- theft flashes on service ...1995 Bonneville car turns over but wont fire an security light is flashing car ...
If you have another key try that one if not the one you have needs to be recoded but look at the top of the key and make sure there is not a hole in it the chip could have come out
The light and the word stop should be sending you a clear message . The engine hard starting and sluggish is also sending a message and if you do not heed the message and have the fault codes read and the problem fixed then the next message may be replace the engine or gear box . The light is there --not to be an annoyance ---but to inform you that something drastic is going wrong and it needs urgent attention.
the engine (there are more than one engine) has a distributor. "have spark at coil down to dizzy but no spark at plugs" this can mean only 2 things. 1: spark wires are dead. all 4, kinda hard to believe huh? 2: the dizzy is way off time. so time the dizzy and now spark lands on each wire term. if not a dizzy engine, post exact version of engine and country.
turn the key on and wait till the security light stopsflashing ( this could take as long as 30 minuets ) then turn the key off then back on but do not try to start the engine and wait till the security light stops flashing ( again this could take as long as 30 minuets ) then turn key off then turn key on and start engine.
wait untill its dark outside, open your hood and start the engine. look around for white / blue or yellow flashes of light coming from your plug wires. most of the time the spark plug wires are worn out / degraded from heat , and you can see the small lightning flashes in the dark. if you see no light flashes ( shorts to ground) then you can have a cracked / faulty distributor , or bad spark plugs.
turn the key on and try to start the engine it should start than stall, leave the ignition on for approx 10 min the security light will flash when it stops flashing turn the car off and then repeat this procedure after the third try the theft system will attempt to relearn the security data, if it is valid it will then start if not you will nee someone with a tech 2 scanner (gm shop) to help you out
reading codes is must to a engine with computers..if your light would flash 1 time then 3 this called code 13.. your only flashed 2 time could be code 11 or code 12 get on internet and look up the code... you can all so try to disconnect the postive side of the battery for 5mints.. this should clear any codes..hook battery back up..start engine if engine runs first time..you got a something in your ingction system that not working write..
×