Cars & Trucks Logo

Related Topics:

T
TerrY Posted on Mar 13, 2015

Were is the fuel pump relay located and how can I test it? Also if it is okay shouldn't I be able to see gas going into the carburetor?

5 Related Answers

Anonymous

  • 625 Answers
  • Posted on Jun 19, 2008

SOURCE: location of crankshaft position sensor 4 cyl

41918676the cranshat position sensor is located very close to the ignition ciol pack, and it is a two wire conector, if you can't still find it remove the coil pack and should be behid it

Ad

Anonymous

  • 1990 Answers
  • Posted on Jan 21, 2009

SOURCE: 1999 bonneville fuel pump

There is a Fuse Relay Station under the Hood on the Drivers Side Up torwards the Firewall. The Relay is in there. Just replace it. it is Very tough to test and is More than likely your Problem and Cheap.

Anonymous

  • 1392 Answers
  • Posted on Mar 07, 2009

SOURCE: 1991 pontiac 2.5 tech 4 fuel pump relay wont energize

Look for a bad fuse or relay. If both check out, most likely an ECM problem

Anonymous

  • 107 Answers
  • Posted on Aug 01, 2009

SOURCE: 93 Pont Gran Am fuel pump relay location

under the hood in a black box though its not labled it is 2"x2" there should be one for the power windows rite nxt to it and yes they are the same so you can switch them...

Anonymous

  • 1985 Answers
  • Posted on Nov 24, 2009

SOURCE: fuel pump works but engine sounds like its not

fuel pumps may be running but you need to check fuel pressure at reed valve on fuel rail to see if you have enough to fire the injectors , you need at least 50psi

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1984 Ford F-250 4+4 dual wheel 2 tanks fuel fizgram.

Question edited for a bit more clarity ' carbiator ' :>D You must be Australian.
All questions need 'year make model'. Dawning on me, that you mean 1984 FORD F-250! Ah, and 'Out new fuel pump I' should be 'Put new fuel pump 1'? No one proof reads in America or the Antipodes!
Question moved to correct category.

What is a 'fizgram'?

Check the fuel pump relay for correct operation. If there are two pumps, there should be two relays. You can swap one for the other as an easy test.

https://www.google.com/search?q=1984+ford+f250+fuel+pump+relay+location

..
0helpful
1answer

Won't keep running

Fuel injectors ? Are there being commanded on by the PCM/ECM ? Do you know how to test fuel system , fuel pump relay etc... Fuel pressure test ! Follow this guy's testing procedure ! GM Fuel Pump Relay Testing If you can't your best bet is take to the dealer !
0helpful
1answer

Fuel pump relay on gmc 7500 2003 with gas engine?

images for Fuel pump relay location on gmc 7500

GM Fuel Pump Relay Testing - YouTube

? 27:40
https://www.youtube.com/watch?v=McnXLcJNVfI
Mar 14, 2012 - Uploaded by ScannerDanner
How to manually jump a fuel pump from the fuse box ... Is this the same on the 2003 cavalier chevy? ... I go through fuel pumprelays often on my 99 GMC Yukon Denali. ... Finally, fuel pressure totally drains after motor turns off. ... run right, it would sputter when you hit the gas and finally just would not start.Missing: 7500
1helpful
1answer

NO GAS GETTING TO CARBURETOR WILL TURN OVER BUT WILL NOT START. ALREADY PUT IN NEW FUEL PUMP. WILL START IF PUT GAS IN CARBURETOR AND STOP WHEN IT BURN OUT.

possibly no power to fuel pump check fuses first and relays then wiring be sure pump works.test pump it ispump or power to pump related...
0helpful
1answer

1991 1500 4x4 5.7 liter suburban. Will start and then die, like its not getting gas. Fuel pump has been checked, gas pressure regulator has been replaced, shop said hose from fuel tank to fuel pump had...

Yes, there is a Fuel Pump Relay. The Relay is located on the firewall just above the left-hand (even cyclinders) valve cover as viewed from the front of the car. There is also fuel pump test lead attached to the harness at the fuel pump relay. Attach a power wire from the battery to the lead and the fuel pump should come on. If fuel pump comes on, the relay could be bad. Also check the fuel filter located under the passenger side of the truck tucked into the frame rail.
0helpful
1answer

I have installed a brand new fuel pump on my 2006 Chevy Trailblazer LS. The fuel pump relays are working properly, but the fuel pump, itself, won't work. What would cause a brand new fuel pump not to...

NOW POWER TO IT OR BAD GROUND OR CLUGED FUEL FILTER ORBAD FUEL RELAY SWITCH THE PUMP SHOULDN;T BE BAD IN AN 06 IT COULD BE IT SHOULDN;T BE CHECK FOR POWER TO THE PUMP IT SELF ITS THE FIRST PLACE TO START IF THE PUMP IS PUMPING DISCONNECT THE LINE AT THE FILTER TO SEE IF YOU HAVE FUEL FLOW AND JUST WORK YOUR WAY UP THE SYSTEM THERES KNOW EASY ANSWER IF YOU WANT TO DO IT YOUR SELF JUST BE LOGICAL AND MAKE SURE YOUR TEST ARE GIVEING THE ANSWER THAT YOU NEED DO THE EASYEST TESTS FIRST AND REPLACE PARTS LAST GOOD LUCK
0helpful
2answers

U can see that the fuel pump is working but the car will not start. We have changed the fuel filter an there is gas getting to the carborator but very little. If u put gas directly into the carborator it...

There is a fuel pump relay but no pressure relay. If the pump is working then that eliminates the relay as the cause. I would disconect the fuel line to the carburetor and check the fuel pressure there. I believe it is supposed to be 12-14lbs. If it is less, the pump could be going bad.
0helpful
1answer

How to check electrical problems whit the fuel pump

first turn the key on and listen for the fuel pump to come on for 15 sec.this is to prime the system before you crank the engine.no sound,with only a rubber mallet( no metal hammers )hit the bottom of the gas tank,no fuel pump operating go to the fuel pump relay and remove then test for (2) 12 volt power supplies with key on,if ok check ground at relay if okay remove gas from tank and drop gas tank to check for voltage at pump.replace pump if 12 volts is present.
3helpful
4answers

My 1993 Oldsmobile cutless ciera wont start

if you cant here it run when you turn the switch on then its the pump!!
cost 78 dollars at auto zone and two hours too install for most people
Not finding what you are looking for?

115 views

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...