How do you replace the serpentine belt on a 2000 buick park ave with V/6 engine ?
yohojoe
Firt - study & write down (draw) the belt path,,
and be sure about it..
Then - put a wrench on the nut in the center of the tension pully.. Move the tension pully to loosen the belt.. Pull belt off..
Repeat to put new one on..
Should be pretty easy..
Push down on tensioer pulley with a 15mm box end wrench on tensioner pulley nut.then you can remove belt but you need to hold down tensioner pulley bolt with wrench to remove and replace drive belt.
950 views
Usually answered in minutes!
Calsbiz or Sawdust
I hesitated to use a socket and standard 16" breaker bar on the bolt in the center of tensioner for fear of breaking the bolt off and a five point wrench is not long enough to give you the leverage you need to move the heavy spring thats in the tensioner. Is that bolt strong enough to hold the stress and pressure leverage that will be applied ??
yohojoe
How to turn on my speedometer on windshield 2000 park ave
×