FRONT wipers,. not left gate rear , correct.?
it;s dead or what? not told at all what it does wrong. (or good)
eg. sweeps only ,part way,or never stops or 100& dead>
are both arms dead//.. sorry we can't see it fail..
check all fuss first
scan to PCM 2nd
stop gue$$ing.
or find a shop and out come their votmeter to find it.
can be bad grounds to.
fuse 6 ,30 amps must not be blown
then 2 relays must work"windshield on/off relay AND , windshield wipe speed relay both must be good.
g101 ground near wipe motor
The FEM module, see the stalk set to wiper fast (best) and
then closes both relays and bingo, wiper motor runs
stalk >>>FEM>>>relay1/2>>>>wiper motor
that is how it works
FEM goes dead to if fuse 2 and 113 blow. and fuse 14 too
15 pages in the SM covers power
even a bad ground to the wiper stalk switch, fails.
a tech does the tests the facts (measurements) dictates their actions, tracing the failing path correctly. it is a skill.Not a guessing game.
×