2001 Ford Mustang GT Logo

Related Topics:

A
Anonymous Posted on Mar 09, 2015
Be the first to answer

How do you move the transmission dip stick out of the wayso you can remove the valve cover on a 2001 mustang gt

Answer This Question

5 Related Answers

Anonymous

  • 37 Answers
  • Posted on Mar 19, 2009

SOURCE: Mustang GT 4.6 EVAP Canister Purge Valve Location?

You will need to remove the right front wheel & wheel well liner. The canister purge valve is behind the cover. It should have two tube going into the bottom and one on the side near the top.
You can fix it!
If this helps you out please rate me!
Brett

Ad

Anonymous

  • 437 Answers
  • Posted on Jun 06, 2009

SOURCE: Firing Order for 2001 mustang gt 4.6 2v

The firing order is = 1-3-7-2-6-5-4-8

Anonymous

  • 3092 Answers
  • Posted on Nov 27, 2009

SOURCE: 2001 mustang gt,all access. work fully charged

Check your neutral safety switch with test light.

TittyMonster

John Smith

  • 13 Answers
  • Posted on Feb 16, 2010

SOURCE: transmission on 2001 for taurus seems to be

you should see a black plastic plug near the dipstic on the tranny housing, if its clogged with grease you will have this problem, use carb cleaner and spray it when cold, dont get the cleaner on anything painted

Gozer

Mike Raatz

  • 435 Answers
  • Posted on Apr 27, 2010

SOURCE: remove driver side headlight assembly

It's easy no tools required.
There are 2 inserts behind the head light, just pull them straight up and the headlight will come out. I recomend you use masking tape on the top bumper to prevent scratches when removing.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I move the transmission dip stick out of the way so I can remove passenger side vavle cover
there is a bolt on the dipstick,remove it and twist the dipstick out of the way.
25543754-4ooqw4ezaqm3bmr4zsusbbqm-4-0.jpg

25543754-4ooqw4ezaqm3bmr4zsusbbqm-4-2.jpg

25543754-4ooqw4ezaqm3bmr4zsusbbqm-4-5.jpg

25543754-4ooqw4ezaqm3bmr4zsusbbqm-4-9.jpg
Read full answer
Mar 09, 2015 • 2001 Ford Mustang GT
0helpful
1answer

I am trying to remove the passenger side valve cover, but the transmission dip stick is in the way
look lower on this stick there should be a bolt, that holds it to the bloc, loosen it and it should allow it to move so you can remove the valve cover
Read full answer
Mar 09, 2015 • 2001 Ford Mustang GT
0helpful
1answer

How to remove oil dip stick
ITS ON THE PASSENGER SIDE BEHIND THE A/C COMPESSOR AND BELOW THE VALVE COVER.. LOOKING AT THE MOTOR WITH HOOD UP IT WILL BE ON THE LEFT SIDE IT SHOULD STAND UP PRETTY TALL. IF YOU ARE WANTING TO REMOVE THE WHOLE DIP STICK TUBE. ITS ATTACHED TO THE VALVE COVER BY 1 BOLT.. TO REMOVE ENTIRE DIP STICK TUBE WHICH GOES DOWN INTO THE OIL PAN.. IT SHOULD HAVE A YELLOW RING FOR DIPSTICK.
Read full answer
Feb 05, 2014 • 1990 Ford F250
0helpful
1answer

Diagram 4r7ow transmission
For there to be no oil on the transmission dip stick there must be a big leak in the box somewhere. Pouring in oil at one end will only be a waste of money until the leak is fixed. You will probably be looking at 1 1/2 gallons to fill the transmission. Check the coolant for oil in the water or get underneath and look for a large oil slick under the car.
Read full answer
Dec 06, 2013 • Ford Cars & Trucks
0helpful
1answer

How to check transmission fluid on 88 mustang 5.0
from:milton wright.your 1988 5.0 mustang with automatic trans.the dip stick should be under the hood,on the passenger side next to the fire wall.look down! check with the engine running,transmission in park!
Read full answer
Jul 16, 2012 • 1988 Ford Mustang
0helpful
2answers

I'm doing trans fluid and filter change on 2001 mustang 3.8 ltr with auto transmission and yellow spin top like plastic with o-ring was laying in pan where does it go?
it should go on the top of the filter assembly.
Read full answer
Feb 06, 2011 • Ford Mustang Cars & Trucks
0helpful
1answer

Want to learn how to check transmission fluid on my ford mustang 1994
At the rear of the engine locate the dip stick going into the transmission case, it look like an oil dip stick. Pull it out and wipe clean. Re-insert pull out and read the fluid level at the bottom of the dip stick. Do this with engine off and on a level surface.
Read full answer
Dec 12, 2010 • 1994 Ford Mustang
0helpful
1answer

1984 mustang 5.0. Where do I add oil
if is motor oil take valve cover top of usually is on the left side of motor trany oil pour down where the dip stick is use a funnel good luck
Read full answer
Oct 09, 2010 • 1984 Ford Mustang
9helpful
4answers

How do I check the transmission fluid in my 2001 cadillac catera
There is no dipstick on the 01 Catera or any Catera for that matter (97 to 01) also same transmission used on 3 series BMWs.

I have 2 - 2001 Cateras....no....dip...stick.

It's a sealed transmission. There are fluid drain plugs, one at side of the tranny and one at the bottom. Jack the car up from the front on a level surface. Place a hose to a funnel and remove the top filler access plug (the side one). Insert the hose here and fill the funnel until fluid leaks out the side hole (make sure you have a catch pan). Then drop the car and let the excess fluid level out from the fill hole. Raise the car again and wipe away the excess fluid and re-install the filler plug.
Read full answer
Jun 19, 2010 • 2001 Cadillac Catera
0helpful
1answer

Were is the dipstick at
WHICH DIP STICK OIL DIP STICK FRONT OF ENGINE BELOW FRONT VALVE COVER.THE TRANSMISSION DONT HAVE A DIP STICK IT HAS A VENT FILLER CAP.THE GARAGE HAS TO PUT CAR ON A LIFT TO CHECK TRANSMISSION FLUID BY REMOVING A CHECK PLUG.IF TOO FLUID COMES OUT PLUG HOLE TOO MUCH FLUID IN TRANSMISSION IF NO FLUID COMES OUT NEED TO ADD SOME.IF A SMALL SLOW DRIP COME OUT TRANSMISSION FLUID LEVEL IS OKAY.SEE THE GARAGE HAS TO RAISE VECHICLE UP WHILE RUNNING IT HAS TO BE LEVEL THEY REMOVE THE CHECK PLUG TO SEE HOW MUCH FLUID IN TRANSMISSION.ITS DANGEROUS TO DO IT YOUR SELF.
Read full answer
Jun 08, 2010 • 2003 Chevrolet Impala
Not finding what you are looking for?

View Most Popular

2001 Mustang GT

  • Cars & Trucks

Related Question

How do I move the transmission dip stick out of the way so I can remove passenger side vavle cover

  • 2001 Ford Mustang GT

47 views

Ask a Question

Usually answered in minutes!

Popular Questions

My seat belt alarm keeps dinging even though my seat belt is secured/fastened. how do I make it stop?

2000 Ford Mustang

Shaker 500 stereo

2005 Ford Mustang

A diagram of a 2003 Ford Mustang interior fuse box?

2003 Ford Mustang

I need a fuse box diagram for a 2008 ford mustang

2008 Ford Mustang

Firing order diagram for a 289 motor

1966 Ford Mustang

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...