I ajusted my headlights, but my highbeam on the right side is higher, but when lowbeam is on they are even. what is that cause?

Go to http://www.bbbind.com/free_tsb.html free wiring diagrams !

it may need reset at the dealer to accomodate the new style/type of lamp..unless the cars', original factory setting does not allow for that change to be made.. they can tell you either way..

low beam not working could be relay or bad contact at stork control. Fog lights should only work with park lights on. not supposed to be on with headlights like in the movies. This is illeagle in australia to have head lighs and fog lights on together as well as being dangerous to other motorists

It is either the light switch or the headlight relay, I would say first go for the relay as it carries the actual load of the lights. It will not be a fuse, the headlights are fused individually.

I have same problem but my low beam don't work and drl but my high beam work when flick.

is the problem solve?

points ih headlight switch dirty or burnt

Try putting your tilt steering wheel all the way up and see if it comes on. Ors did that and we had a pinched wire in the steering column.

check the lowbeam headlight relay located in the fuse panel in the engine compartment near the battery.

the filament on the low beam burnt out. but the high beam didn't. You have a filament for each. 1 for high beam and 1 for low beam in the same light bulb. You need a new head light.

try replacing the fuse because low beam and high beam are two different systems