You would need a dodge harmonic balancer puller. you can rent one or buy
Go to a shop like Advanced Auto or O Rielly Auto Parts. They will rent you a Chrysler Balancer Puller for about 80 bucks which you get back in full when you return the puller within 48 hours. Loosen the bolt in the balancer, but do not completely remove it. Put the puller on with the center shaft against the head of the balancer bolt and use it to pull the balancer.
Take everything in front of it off. Use a long breaker bar and socket, 1/2" drive, 3/4" if you have one. Put the socket on the nut and the bar across to a piece of the frame. BUMP the starter. DO NOT CRANK IT. This will break the nut loose.
93 views
Usually answered in minutes!
×