2006 Chevrolet Tahoe Logo

Related Topics:

A
Anonymous Posted on Mar 07, 2015

2006 chevy tahoe reduced engine power message and traction stability disabled message. no engine power

  • JOHN LAPIER Mar 07, 2015

    Hi Anonymous, I want to help you with your question, but I need more information from you. Can you please add details in the comment box?

×

4 Related Answers

Anonymous

  • 359 Answers
  • Posted on Dec 15, 2009

SOURCE: I have a 2003 Chevy Tahoe. No problem this

have the codes pulled this will get you in the right direction most autozones and the like do it for free

Ad

Anonymous

  • 63 Answers
  • Posted on Jan 06, 2010

SOURCE: 2005 chevy cobalt, car wont start ... check

disconecting the battery should reset the pcm. but you will need to find out what caused the problems.

Terry Long

  • 241 Answers
  • Posted on Feb 06, 2011

SOURCE: I'm getting Engine Power reduced

there having a lot of electrical issues with this vehicle.i would check the eng control module and the accelerator pedal sensor for corrosion in the connectors,if there corroded clean them with a soft brush and put dielectric grease on the connectors and modules.hope this helps.

A

Anonymous

  • Posted on Mar 05, 2013

SOURCE: 2011 Chevy impala engine power reduced

Like ALL Vehicle problems, the car has to be scanned
with professional test equipment, to find any codes &
systems with the faults,before any component testing
can take place

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to reset stabilitrak on a 2007 chevy equinox

Your vehicle has electric power steering !
The Electric Power Steering (EPS) system reduces the amount of effort needed to steer the vehicle. The system uses the power steering control module (PSCM), torque sensor, power steering motor rotational sensor, power steering motor, discrete battery voltage supply circuit, and the GMLAN serial data circuit to perform the system functions. The PSCM and power steering motor are each serviced separately from the steering column assembly. However, the motor rotational sensor is serviced as part of the power steering motor, and the torque sensor is serviced as part of the steering column assembly. The PSCM also monitors vehicle speed from the engine control module (ECM) via the GMLAN serial data circuit. At low speeds more assist is provided for easy turning during parking maneuvers. At higher speeds less assist is provided for improved road feel and directional stability.
Stability System Indicator The IPC illuminates the stability system caution indicator when one or more of the following conditions exists. The EBCM sets any one of many VSES-disabling DTCs. The EBCM sends a serial data message to the IPC requesting illumination.
Traction Control System Indicator
TRAC OFF The instrument panel cluster (IPC) illuminates the TRAC OFF indicator when the following occurs:
?€¢
The electronic brake control module (EBCM) inhibits the traction control system due to a malfunction in the traction control system. The IPC receives a serial data message from the EBCM requesting illumination.


?€¢
The Body Control module (BCM) detects that the traction control switch has been pressed (signal circuit is low). The Body Control module (BCM) sends a serial data message to the EBCM in order to disable traction control. The IPC receives a serial data message from the EBCM requesting illumination. The BCM sends a serial data message to the radio in order to activate an audible warning.


Your best bet is to take it to a ASE certified an qualified repair shop ,that has the diagnostic tool to fix this problem .

1helpful
2answers

I HAVE A 2008 TAHOE AND THE STABILIZATION LIGHT CAME ON AND IT SAID REDUCED PWER LIGHT ALSO WHAT DOES THAT MEANS

I have a 2008 Tahoe that had a similar error stabilization off, ABS errors, entire vehicle shutting off, door locks open/close at will, I changed out the Body control module and the programmer showed me the many communication errors from various modules, then one solution was suggested to change the Battery cable, so I started checking out the grounds and I found varying resistance from the Neg. Battery post to the Body so I removed the neg. cable to the engine and replaced the post with a threaded post connector and a 42 inch cable then added a 12inch to the frame, then also added a 12inch from the Neg. post to the body just under the Mega fuse, Make sure the paint is removed before you assemble and use the appropriate amount of washers to make the mega housing even to the body. No more errors, it was just a real bad ground and GM knows about this and it seems they are using this to make a lot of money off there unsuspecting customers,
2helpful
1answer

I'm getting Engine Power reduced and Stability/Service Traction. Truck was running fine just yesterday no problems. What do I need to do, this is a 2007 Chevy Tahoe.

there having a lot of electrical issues with this vehicle.i would check the eng control module and the accelerator pedal sensor for corrosion in the connectors,if there corroded clean them with a soft brush and put dielectric grease on the connectors and modules.hope this helps.
5helpful
3answers
1helpful
1answer

My tahoe has the traction off light what doe that mean?

It means the traction control system has been disabled. It can be done manually by pressing the switch on the dash or by an onboard computer (meaning there is a problem). If you can't press the button to get the light off, then get it scanned. Traction control system works with the anti-lock braking system and the engine to help the driver control the vehicle in the event it should be slipping or skidding. It will activate the anti-lock brakes, help reduce steering pressure to better steer and can sometimes cut out engine cylinders to reduce the power going to the wheels to better control in the skid.
7helpful
2answers

Chevy HHR 2008 LT 2.4. Message ESC OFF, SERVICE TRACTION, and ENG PWR REDUCED. What to do? Can I drive car whit this problem.

Hello and welcome. the engine reduce power waraning is the key to the other problems. this is normally a problem with the electronic throttle system. the engine control module disables the traction control system when it detects a engine problem, in your case a problem with the electronic throttle system. you shouldnt drive with this concern. this is normally covered under the vehicles 100,000 mile warranty. you need to conteact your nearest dealer for help
0helpful
1answer

My 2006 Chevy Tahoe displayed the Reduced Engine power and stability control system turned off. Drove the vehicle home at reduced power never. Temp OK, Battery gage read lower than the normal +14V, Oil...

the post that everybody refuse to read or acknowledge is the first simple instruction
when ever there is a problem , have the fault codes read first
it is free at autozone and other parts shops
then knowing what the problem is you can have it fixed at an accredited service center for less money that fixing what is not faulty costs
40helpful
2answers

Engine power is reduced keeps showing on the dash screen, as does service traction control. the car is running rough and has no power when this occurs.

how do you fix the "reduced engine power" light on the dash bard of a 07 Chevy Impala LTZ and "Service Traction Control"?
Not finding what you are looking for?

198 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...