SOURCE: abs , brake, traction control light on in 04 lesabre
check to make sure that all the the bulbs in the rear are working,even the third light
SOURCE: abs and traction control
hi if you know for sure it's a wheel speed sensor
remove that wheel
remove the caliper and caliper bracket
remove the brake rotor
there are 3 bolts on the other side of the knuckle(13mm)
remove them
remove the axle nut(1 5/16)
remove the hub bearing assembly(you may need to use a hammer on the hub flange)
hope this helps
SOURCE: brake light abs light traction control light all
you'll have to have it diagnosed at a repair shop to pinpoint the source. sorry, but thats how they make them. you could buy your own but it'll cost about 200$
SOURCE: abs and traction control light is on dashboard
When your ABS light comes on it means you have no ABS only normal braking. Also a traction light will come on at the same time becaust it is directly linked to the ABS to change torque before a wheel slips. You need to have it hooked up to a professional scanner, because there are many different possibilities of what is wrong with the ABS/TCS system. hope this helps!!!
SOURCE: 03 Yukon Denali Traction Control/ ABS Problems
my 2000 yukon has the traction control light on and the abs light on any anwsers?
112 views
Usually answered in minutes!
×