Try holding key in start position while moving shifter slowly through all gears to see if you get a click or start at all. Safety neutral switch/back-up lights on transmission were known to cause that problem.
SOURCE: wont start
There's only 2 more things that I can think of, check the fuse for the ignition, then the computor itself, you did everything else.It might be the problem and may not.
SOURCE: 1990 ford f-150 nothing happens when ignition is turned on
Solenoid was not mentioned as replaced.
If it was not part of new starter...that's the culprit.
Ignition switch (smaller wire) activates the solenoid (heavier wire) which in turn activates the (high current) starter.
SOURCE: 1991 Nissan 240SX starter will not turn!
If you've applied 12VDC to the solenoid and it does nothing, not even click, then the solenoid is toast!
SOURCE: need wiring diagram
Go to autozone.com and register they have good wiring diagrams for your truck.What I saw was all the relays going to ground so you should have 12V coming off the ignition switch.
SOURCE: 2003 Chevy Impala periodically won't start
Try under the dash, attached to colum is a switch that the rod goes into from your ignition key switch, that may need to be adjusted tword your steering wheel just a touch, they go out of alignmnet from time to time
291 views
Usually answered in minutes!
×