Disconnect battery, remove wiring harnesses from front and back pumps on washer tank. You can leave in pumps in tank if so desired, but not recommended. Each pump can be pulled out of tank there is a O-ring on each of the pumps that keeps the pumps in place make sure if you do pull them out that the O-ring stays on the base of the pumps this how the pumps are kept in place in the tank. There are 3 bolts that hold the tank in place 2 on top and one on the bottom. The bottom one is kind of tricky to remove, if you have a magnetic socket that will work best for the bottom one. The tank is molded to fit the side fender wall. Be careful when taking the tank away from the fender as it might be wedged in there from age. Good luck hope this gives you a better idea of how to remove the washer tank.
Do you think this would work?
http://www.ehow.com/how_5189121_change-tahoe-washer-fluid-tank.html
156 views
Usually answered in minutes!
×