SOURCE: 1997 mercury mountaineer cigarette lighter
http://www.genuineservice.com/genuineservice/en/default?page=genuineService
Go to this website and pick owner guide on left task bar. Input vehicle info then get the owners manual.Your fuse panel info starts on page 120.
To replace lighter just reach around behind it and unhook connectors. The stick something in the socket(I usually use 2 fingers) and twist it counter clockwise. the center will screw out of the sleeve.
SOURCE: Need to know how to locate my fuse box on my 02 Mountaineer?
http://www.genuineservice.com/genuineservice/en/default?page=genuineService
Go to this site and pick owner guide on left task bar.Then input your vehicle info and pick get owner guide. Pick owner guide 2nd printing and fuse info begins on page 268
SOURCE: In 97 mercury mountaineer, how to turn off "check engine" light
Go to the local parts store, have them check the codes (they will do this for free usually). It will tell you what sensor needs to be checked/replaced. Once the part is replaced, it will clear on its own. They can also reset the code, but it will come back if the trouble persists.
SOURCE: No headlamps on 97 Mountaineer.
Buy 1 bulb and insert in each socket one at a time. If the low beam does not work on either side you know it is not because of the bulb. Then you will have 1 extra bulb for emergencies. Ask at autoparts about a headlight relay for lowbeam. When you wrote that highbeams work on pullback you did not say if they stay on high. You have "Flash to Pass" for highbeam which can be a different circuit. The automatic headlight switch is yet another set of contacts to go bad. You should set "auto" to off so you are not fighting this feature when testing. Good Luck
102 views
Usually answered in minutes!
×