- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
all modern cars are 180 to 200f. the service manuals cover this.
but no year car told
no country told
so can;t read it to you.
in AFRICA?
MY ONLY GOOD CLUE IS BELOW. WIKI + 1.4L NOT SOLD ELSEWHERE.
From 1984 to 2009, Volkswagen of South Africa manufactured two variants of the Mk1 Golf;
The 2007 VW South Africa Citi Golf range starts with a standard Citi Golf, in either 1.4 or 1.6 litre fuel injected models.
The 2009 VW South Africa Citi Golf range consisted of four new models:
Lift the tail gate. There are clips or screws along the top edge. Remove this. The clips all you do is pull the center pin with a panel tool or pliers then the rest will come out. Then you will need to remove the clips holding the rear side of each of the back wheel wells in. Under that will be more clips, screws or bolts that hold the side edges of the bumper cover on.
Hi if your VW golf is from the mk4 era then you'll have to possibly take off the bumper to replace the headlights or headlight unit Search YouTube for bumper removal guides it's very easy
NOPE YOU HAVE TO REMOVE FRONT FENDERS AND BUMPER COVER. REASON YOU HAVE TO REMOVE FENDERS AND BUMPER COVER.YOU CANT REMOVE RADIATOR HOSES AND REMOVE COOLING FANS.FENDERS AND BUMPER COVER IN THE WAY.
Usually a small flat screw driver wedged under the plastic covers should help you pry it open.
FYI If a fuse blew it went for a reason. ( old age on a 3yrs old car isn't a reason).
In order to remove the headlights, you need to remove the front bumper cover.
Place the front of the car on jack stands.
You will need to remove the screws on each side in the fender wells on the back side that screw into the bumper. these are torx screw head type.
On the underside of the car there are larger torx type screws that attach the bumper cover to the body. They need to be removed.
You will need to remove the grill that has the VW symbol on it. Under the grill there is more torx type screws to remove. Inorder to remove the grill you need to get the hood release rod off as well.
With the bumper cover removed, there are four torx type screws holding the headlight in place. Once removed you can unplug them and the head light is off.
you should have an h7 bulb, once to take the rubber grommet behind the headlight, you will see the h7 socket, which has to wires in it, gently pull thi socket off, then there is a small wire holding the bulb in place, gently unhook the wire from the one side. and turn it to the other side and the bulb shoudl come out... replace the bulb putting it in the same way the other bulb came out.. notice the h7 bulb has a small notch on one side. it has to go in the same way or the wire will not hook back on. once it has been placed, turn the wire over the base of the bulb and hook it again, then put the socket back on the bulb and put the grommet back on the headlight.
×