Hello i have a 2004 chrysler seabring wippers and turn signals dont work fuse is ok

sounds like wiring issue or the accessories fuse may be bad. Look for fuse under dash or it could be the relay under hood, in fuse relay box. accessories fuse or lights?

I have no specific model experience but the downstream or diagnostic O2 sensor is generally found screwed into the exhaust system just after the catalytic converter.

would you like to be talked through the diagnosis?

P0129 CHRYSLER Description The Engine Control Module (ECM) has detected an out of range signal from the Manifold Absolute Pressure (MAP) sensor
Simply put, the MAP sensor needs replaced.

Read more: http://engine-codes.com/p0129_chrysler.html#ixzz29o7D5h2u

You may need a new multi function switch.

check the fuses especially the one(s) for the brake lights. have someone stand in back of car and see if brake lights even work.when you step on brake pedal,you should be able to hear a "click" that is the shift release solenoid letting the shifter come out of park. u might also have a bad brake lite switch or broken/burnt wiring coming off the brake light switch.

Hello , I'm Sorry We Got Dissconnected But Im Sure Your INFO WAS SENT Before then. Is All Ok Now?

check the brake light switch under the dash toward the top of the pedal make sure the switch,connector and wiring are ok check the fuse also

short in the relay or the relay itself is bad and it is short circuiting the computer.

check the ignition switch common on chrysler