Where is transmission filter located on a 2002 honda civic ex?

SOURCE: location of air filter honda civic 2000

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528018f440

SOURCE: Liters of oil in 2000 honda civic ex

3.7 quarts, not liters. Good luck and thanks for rating my response!

SOURCE: I want to change ATF to my 1986 Honda Civic DX.

one is on the on the side of the transmission and the other is just below that

George Hels

• 528 Answers
• Posted on Dec 15, 2010

SOURCE: Hi, I'm trying to change

Honda usually doesn't use drain plugs on their automatic transmissions - you'll need to remove the transmission pan to change the fluid. You will need a new gasket for the pan and you might as well replace the filter since you'll be there - the filter usually comes with a gasket and it is a great idea to change it if it is the original. There is no identifying marks on that filter to know if it is the original or not. Make sure you remove all of the old gasket from the tranny and the pan and wipe both surfaces down with a rag soaked in carb cleaner to ensure a good seal.

Iron

• 3018 Answers
• Posted on Apr 17, 2011

SOURCE: Where is the location on

Hello,
Manual transmissions have a fill plug and a drain plug on the side of the transmission. The fill plug is a little above the drain plug. Pull the fill plug and fill the transmission until the transmission fluid just barely seeps out and re-plug the transmission. That is the proper way to fill it. You will need a long stem funnel to give you the room you need to fill it. Your transmission requires a 10W30 weight motor oil, just like your engine. If you have a little time and 3 or 4 quarts of oil laying around you can pull the fill plug first and THEN the drain plug and let all the oil drain out. Then plug the transmission and re-fill it with fresh oil and this is a transmission flush for your transmission. You just saved $70 shop charge doing this. I say pull the fill plug first and THEN the drain plug because the last thing you want to do is pull the drain plug first and then find out the fill plug has welded itself and won't come out and now you can't fill the transmission. Fill plug first always.
Regards, Tony