Question about Hyundai Tucson
Bill has good points. But if it slipping, then replace the clutch package. I would replace the master and slave at the same time. Have the oil changed in the transmission and will be good to go for another 100,000+ miles.
Posted on Feb 11, 2015
Check /replace clutch cable or replace master cylinder. If the clutch has not been replaced it may need a clutch kit as the indications are that the pressure plate is weak ( worn clutch plate or from overheated clutch)
Posted on Feb 10, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Hyundai tucson clutch
Thank you for the request. Since the car only has 24,000 miles on it, I would take it back to the dealer. It does sound like that your clutch needs an adjustment of some type. Since I do not own a Hyundai I have no idea what the actual problem might be. I just did some research and found out that the clutch in your car is hydrolic (meaning that it uses a master and slave cylinder with hydrolic fluid to push the clutch arm when you push the clutch pedal with your foot). Trying to work on this type of clutch system can sometimes be a very hard to do. With the small amount of miles your car has on it, I would get the dealer involved in solving this problem. It could be something as simple as bleeding air from the hydrolic system of the clutch or it might be replacement of either the master cylinder, the slave cylinder and/or the fluid line that goes in between those two cylinders.
Much good luck in fixing this problem.
Posted on Nov 27, 2008
Unfortunately you have a hydraulic clutch, which is self adjusting on your car.
The problem you are experiencing is the excessive wear to your clutch, or oil contamination on the clutch plate.
Both these problems can only be fully diagnosed once the gearbox is removed and the clutch is inspected.
There is also a possibility of excessive wear, or scoring, on the flywheel surface, the longer you drive the vehicle with a slipping clutch, possibly requiring the flywheel to be skimmed.
Shop around for a best price, and a trustworthy garage !
Good Luck !
A FixYa rating would be Nice....Thanks.....John.
Posted on Feb 17, 2009
both sides front drive shaft removal ,usual cables and whatever disconnected then pull box out ,not difficult but heavy dirty work
Posted on Jan 04, 2011
Tips for a great answer:
Jul 14, 2018 | Hyundai Cars & Trucks
Jan 15, 2017 | 2008 Hyundai Tucson
Oct 10, 2016 | 2005 Hyundai Tucson
Nov 24, 2015 | Mazda Cars & Trucks
Feb 10, 2015 | Hyundai Cars & Trucks
Sep 14, 2014 | 2005 Hyundai Tucson
Oct 27, 2010 | 2007 Hyundai Tucson Limited
Sep 08, 2010 | Hyundai Elantra Cars & Trucks
Sep 20, 2009 | 2005 Hyundai Tucson
209 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: