Bought a horn ring. don't know how the parts go (spring position) to put it back together. been loking for schematic , can't find one. please help thank u ken.
SOURCE: need timing diagram for 93 plymouth acclaim
go to autozone.com and go to vehicle repair info and enter your make model year and then find your timing chain replacement info and pics
i don't think you have to worry about valve bumping on that motor.
SOURCE: need schematics for a holley 2bbl carb off of a
hi there I figured it but thanks anyways. Ken
SOURCE: 1951 plymouth cranbrook 12 volt system conversion
Purchase a one wire (12 volt) alternator,and install it,and it uses one wire only,the out put wire to the battery from the back of the alternator.Then replace all lamps,and bulbs with 12 volt replacements.Disconnect the voltage regulator completely.The radio,if original,will need a voltage reducer,purchase a coil resister to put in line on the positive input to the radio.This coil resister will reduce the voltage to 7 volts,witch will be fine.The starter will work fine,leave it alone.All dash lights will have to be changed also,to 12 volt bulbs.You can find these replacement parts at any N A P A auto parts store.The resister is a part number irc 13,and the alternator will end in a sw,this means single wire.
Testimonial: "thank you"
118 views
Usually answered in minutes!
×