Code p161B mean on a 2010 jeep compass - 2010 Jeep Compass

I use a software called autodata and there is no P161b code listed.
I did find
P016b- closed loop mixture control , limit reached - system too rich
P0161- heated oxygen sensor bank 2

car is in warranty
ask them.
the dealer. the fix is free.
the code means the cars battery read low.
did leave head lights on. parked?
are you in alaska, and its -50F out side.
did someone fool with the battery

P161b is not a valid fault code. Please recheck.

which engine? first year is 2007
which one? errors very by , ENGINE!
2.0 L World I4 (gasoline)
2.0 L VW I4 (turbo diesel)
2.2 L OM651 I4 (turbo diesel)
2.4 L World I4 (gasoline)


p07 means transmission errors,. and need a real scan tool to read them ALL full codes, 700 means (have errors in trans scan me the correct and full way)
P161b (p1 means jeep factory codes, power train)

not B161 or P1618
are you sure, it matters.
this means the battery was low
the battery was disonnected
or while cranking at -40F starter overloaded a weak or discharged battery.... (heard the starter run slow, did you?)
it means battery voltage discover too low for any reasons.,.
P161B-BATTERY DISCONNECT / TCM INTERNAL

ah you posted DTC's in a serial manner that is bad, that.
why not just one post and all symptom in just one.??
p0700s is transmission.
the FSM covers this, what it means, and what it does, and how to find it. the car has not AI, artificial intelligence at all, it just does
tests (called monitors) and barfs them when failed.

you need to use a real scan tool to see all errors, not just the truncated dash errors, which are useless , but cute.

scan it with a real scan tools that sees ALL JEEP codes
not just p0xx codes,
if not all this is just a wasted effort.
sorry but that is the way it is.

2009, what engine there, and transmission?>
gas engine, or diesel and what size engine,?
in what country? must i guess, that too?

p161b
P means power train.
1xxx are factory codes, 0xxx are fed standard codes.
so that means, only jeep books are accurate here.

where did you see that, (in the cluster) ???????????
or someone scan tool> or someone yelled it over shoulders, and said it wrong./????????????
was it really? and 8? or b? (kinda matters, no?) accurate inputs.
P1618-SENSOR REFERENCE VOLTAGE 1 CIRCUIT ERRATIC
P161b ( see how easy it is to get the code wrong)?

rumor has it as
P161B: Battery disconnect/TCM internal.

clean the battery terminals,
or battery weak, voltage not 12.6vdc rested
or alternator dead, and not charging battery.

to find it, login to Mitchell.
and see all codes
http://www.eautorepair.net/Marketing/Default.asp


or you disconnected the battery while key was on?
or failed to clear all DTC first
then see if the code comes bacK>?

Bank 2 sensor 2,O2 sensor.

google translation

Possible causes:

WRONG VEHICLE CALIBRATION FUSED B(+), TRANSMISSION CONTROL OUTPUT, AND/OR GROUND OPEN TRANSMISSION CONTROL MODULE (TCM)