<!-- from fixya rte -->I need the code for my 2002 Honda oddesey - 2002 Honda Odyssey

SOURCE: Replace brake light on my 2002 Honda Oddesey passenger side

Open the rear hatch and remove the two taillight mounting screws. These screws are located behind two plastic flaps that are flush fitting and part of the tail light housing. You will need a small flat blade screwdriver to put under the edge of the flap nearest the light. Pry gently (but persistently) and the flap will open to reveal the screw head underneath. (The hinge of the flap is on the side nearest the hatch opening.) Remove the screws with a phillips head screwdriver or an 8mm socket. Now comes the tricky part. Wiggle/pry the taillight housing as straight back as you can. Keep pulling/wiggling until the forward clip releases. Once it does you will be able to access the bulbs by rotating the bulb holders counterclockwise. Pull the bulb straight up out of its socket. Replace with the new bulb. Note how the forward spear point clip fits into its socket at the forward outboard edge of the housing. Fit the clip and push forward on the housing until you can hear the clip snap into place. Replace the screws and fold back the flaps. You're done.

-T