I have a 2011 Chevy Siverado with power seats. I put the seat all the way down (the height adjusyment)and now I can't get it to go back up. The sitch works it tilts and goes back and forth bu

possible switch itself

they are a tight fit, check underneath to make sure nothing bent then place carefully over the catches and with pressure down and back, they should click right in.

https://www.google.com/search?q=Mitsubishi+galant+2006+bank+2+sensor+1+location&biw=1366&bih=651&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwiC2J-h8bXQAhVLziYKHWNcDjgQsAQIGg#tbm=isch&q=How+do+i+remove+the+back+seat+of+a+2011+Chevy+aveo%3F

Hope this helps

Under the seat is a thin wire.Pull it and push.

Your only option is to modify the seat mounting

This is the second Escape question I have seen
for that issue

It would take someone with fabricating & TIG Welding
skills-- but could be done

CHECK BY THE BACK OF LOWER SEAT CUSHION IF NOT GOT TO DEALER

The seat will only go as high as it does. Very sorry to say there is an aftermarket device, it's called a booster seat. We have some ladies that put a pillow (cushion?) on the seat to get a little extra height.

For seats problem,check the help links given below :----How to remove Seat on car?

http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-seat-on-acura-integra.html

-----------------
Replacing power adjustable bucket seats to both heated and cooled seats? http://schematicsdiagram.blogspot.com/2011/12/replacing-power-adjustable-bucket-seats.html
----------How to Refit Rear seat? http://repairhelpcenter.blogspot.com/2012/01/how-to-refit-rear-seat-on-rover-600.html
--------How to Remove Rear seat? http://repairhelpcenter.blogspot.com/2012/01/there-are-3-10mm-bolts-at-back-of-seats.html
---------second row seat will not fold? http://technoanswers.blogspot.com/2012/01/ford-freestyle-second-row-seat-will-not.html
------------

For all types of power window problem and power windows not working,i suggest you to go through the help links given below.Click the link to go through its procedure to troubleshoot the problem :------

Power window problem?
http://repairhelpcenter.blogspot.com/2012/01/pontiac-grand-am-power-window-not.html
------------

rear door or window will not open ?
http://technoanswers.blogspot.com/2011/06/rear-door-or-window-will-not-open-on.html
--------------
How to remove door panel, door window motor and regulator ?
http://technoanswers.blogspot.com/2011/05/how-to-remove-door-panel-door-window.html

--------

Power windows not working after car wash?

http://howtobyme.blogspot.com/2011/11/power-windows-not-working-after-car.html
---------power locks, power window and power mirror not working?
http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.html

All power windows not working?
http://howtobyme.blogspot.com/2011/09/all-power-windows-not-working-on-2003.html
------------
-------------Complete Diagnosis & Testing Power Windows?

http://repairhelpcenter.blogspot.in/2012/02/diagnosis-testing-power-windows.html

------------

How to replace power window motor in car?
http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-power-window-motor-in.html
----------
HOW TO REPLACE A POWER WINDOW SWITCH
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-power-window-switch.html
------------
How to Replace a Window Motor
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-motor.html
----------
HOW TO REPLACE A WINDOW REGULATOR WITH MOTOR
http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-window-regulator-with.html
---------
HOW TO REPLACE WINDOW RUN CHANNEL SEALS
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-run-channel-seals.html
-------
HOW TO REPLACE A WINDOW REGULATOR
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-window-regulator.html

-----------This will help.Thanks.

the tracks for the seats are pressed out aluminum. they have motors that control the seat adjuster. it seems when worn they will not stay in place and need to be replaced. If anyone that is very overweigh this will create this problem sooner than expected
The seats are made to withstand 250 max. I have sold tracks by GM for 30 years and know personally what they can do in time from weight
(nothing personal)