One of two things . The wiper arm is not tight on the crank pivot , allowing the crank to move but not the wiper arm. Or the linkage from the wiper motor to the crank pivot has become disconnected .
SOURCE: Driver side wiper doesn't move on 2006 Mazda 3
thers a bolt where the wiper piviots and it might need tigting
SOURCE: Windshield wiper arm on passenger side won't move.
tighten the nut under the cap, of the wiper
SOURCE: Windshield wiper arm on passenger side won't move.
It will not be the motor, it will be the linkage or the wiper is slipping on the shaft, the lingkage is accsessible under the cowl, Hope this solves your problem and Merry Christmas
SOURCE: driver side mirror 2004 Pontiac Grand Am
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
SOURCE: 99 Forester driver's side wiper arm no longer moves w/passengers
the linkage has popped off the back you need to get to it to push it back on ots possibly worn and needs replacing
353 views
Usually answered in minutes!
×