It most certainly will especially sitting at lights. high engine rpms and slow speed or loaded . If the engine cools down as soon as there is air flowing through the radiator then the hub will be faulty. If the fan is not making a roaring noise when hot ,the hub is faulty.
SOURCE: overheating..
check the radiator hoses, you might have one that is squeezing in when the pressure builds, with the car running check your upper and lower hoses to make sure they are not pinching anywhere... also you should make sure that the hoses have no build up in them blocking anything.... hope this helps you out
SOURCE: I please need the flywheel
I know some flywheel torque Mitsubishi and other tools, hope that can help you! good luck!
SOURCE: how to remove brake pads on a mistubishi colt bakkie
Jack & support with stands, remove wheels, undo botom caliperslide bolt, flip up calliper & remove pads only 1 side, drain some fluid out of the brake master cylinder, push caliper piston back with G clamp, install new pads, flip caliper down & do up bottom bolt, repeat with other side, replace wheels & your done
111 views
Usually answered in minutes!
×