How do i route the serpentine belt?

YOUR AWESOME ! you gave all the right info to find It ,if image below does not open you can find it to auto zone site ,just log in (its all free) list your vehicle go to repair help then to specfictions then to belt routing.if this helped let me know
Woody

Google the question

Try Auto Zone web site -- for the reported free stuff
however that works

IF FOR SOME REASON THE BELT ROUTING STICKER IS NO LONGER ON THE CORE SUPPORT OR ON THE BACK OF THE HOOD A ROUTING DIAGRAM CAN BE OBTAINED AT YOUR LOCAL AUTO ZONE THEY WILL GIVE YOU A PRINT OUT FOR FREE

Application:
With A/C

Kia_Sedona_2002-2006
Accessory Drive Belts

• ACCESSORY BELT ROUTING
• INSPECTION
• REMOVAL & INSTALLATION

Print

Accessory Belt Routing

Fig. Accessory serpentine belt routing-3.5L engine

Fig. Accessory serpentine belt routing-3.5L engine

Fig. Accessory serpentine belt (A) routing-3.8L engine

Inspection

Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.

Removal & Installation

1. Disconnect the negative battery cable.
2. Rotate the auto tensioner clockwise to release tension, then remove the drive belt.

To install:

1. Install drive belt (A). Route the belt over the components in the following order: Crankshaft pulley - A/C pulley - idler pulley - generator pulley - water pump pulley - P/S pump pulley - tensioner pulley.
2. Rotate auto tensioner arm in the counter-clockwise moving auto tensioner pulley bolt with wrench.
3. After putting belt on auto tensioner pulley, release the auto tensioner pulley slowly.
   
   

   Fig. Accessory serpentine belt routing-3.5L engine
   
   
   

   Fig. Accessory serpentine belt (A) routing-3.8L engine
   

You will find it on the Dayco web site and go through the steps Go to :

http://www.accessdayco.com/Auto.aspx

So here is the serpentine belt routing diagram:

Automotive & Light Truck Year 1992 Make CHRYSLER Type PASSENGER CARS Model LEBARON Engine V6 3.0L 2972cc 181ci GAS FI N 3 Available Parts Routing

DRIVE BELT ROUTING DIAGRAM LOCATED ON THE ENGINE NEAR WATER PUMP PULLEY.IF YOU DONT HAVE ONE AUTO ZONE AUTO PARTS STORE WILL PRINT YOU ONE.

SERPENTINE DRIVE BELT ROUTING DIAGRAM IS ON THE ENGINE.LOOK DOWN AROUND WATER PUMP PULLEY AREA YOU SHOULD SEE BELT DIAGRAM.IF YOU DONT SEE BELT DIAGRAM.AUTO ZONE OR ADVANCE AUTO WILL PRINT YOU ONE OUT.

GO TO AUTO ZONE OR ADVANCE AUTO PARTS STORE WILL PRINT YOU BELT ROUTING DIAGRAM FOR FREE.

look around under the hood , on the underside of the hood, sometimes the belt routing diagram is on a sticker also check a Chiltons Manual sold at auto pARTS STOReS or on the web

There should be a diagram under the hood that shows you how to route the belt, If no diagram, All your major auto parts stores have web sites you can go to to get detailed instructions and diagrams to do it.