What are the torque specifications for a 2007 Jeep Commander 3.7 litre?

SOURCE: 2007 jeep commander rocky mountain no sound from radio

take it to the dealer. they will put a new radio in it if you have under 36000 miles

SOURCE: how to change the time on a 2007 jeep commander.

There should be a button says " TIME" or "Set Up" and make your selection by turning the right knob.

ZJ Limited

• 17989 Answers
• Posted on Nov 26, 2009

SOURCE: can't locate the fuse cavity for the nav/radio on

If I don't misteke, is the cavity 1 (MiniFuse 30 Amp "green") for Audio Amp with BRK.

Review the WK Owners Manual (page 393 for Fuses and Description)

Hope helped with this; remember rated this help. Good luck.

SOURCE: How to remove 2007 jeep commander climate control

The lights in the climate control panel are not bulbs, they are LED and the entire panel will need to be replaced. I would check for a bad connection before replacing the panel assembly.

SOURCE: What are the cylinder head

Hello0 melaniewaite,

The torque is 44 ft. lbs. plus 95 degrees. These are torque to yield bolts so it is highly recommended to use only New bolts.

See torque sequence below.




Regards,
netvan