What is the torque settings on n 2007 Toyota quantum vvti 2.7

Scott Young

• 91 Answers
• Posted on Jul 03, 2009

SOURCE: toyota corolla 1.4 vvti cluth problem

try to give it a little gas when letting the clutch out

SOURCE: What torque setting should I use on the wheels of

approx. 95 ft lbs. happy holidays

Testimonial: "I hadn't even gotten signed in before I got the answer I was looking for. Great service"

SOURCE: diagram for the timing of a toyota hilux 2.o vvti

get a Haynes manual. @$20 at autozone. money well spend as you will get lots of use from it if you work on your vehicle

SOURCE: what is the procedure to

3.0L Engine

1. Drain the engine coolant.
2. Remove the right front fender apron seal.
3. Remove the v-bank cover.
4. Disconnect the inlet radiator hose.
5. Remove the front upper center suspension brace sub-assembly.
6. Remove the air cleaner assembly with the hose.
7. Remove the intake air surge tank, as follows:
   1. Disconnect the accelerator cable.
   2. Remove the bolt, and disconnect the speed control cable with the bracket.
   3. Disconnect the Throttle Position (TP) sensor connector.
   4. Disconnect the Idle Air Control (IAC) valve connector.
   5. Remove the 3 bolts, and disconnect the PS pressure tube From the intake air surge tank, throttle body bracket and No.1 engine hanger.
   6. Disconnect the 2 water bypass hoses and No.6 air hose.
      
      

1. Remove the ignition coil. For more details, refer to the Engine Electrical Section.
   

1. Thoroughly clean the gasket mating surfaces.
   

SOURCE: what is the measure of gear oil for F premio 2007 VVTI ?

Gear oil level is even with the oil fill port. Just fill it until you can insert your finger slightly into the port and feel oil.