SOURCE: 2003 ford crown vic hard steering
i would have to say to check for a relay in your fuse boxes for power steering pressre switch or it may have its own police pkgs have a lot of relays due to all the extras
SOURCE: i need a diagram for a 1998 ford crown vic interior fuse box
ITS FUSE #16 AND ITS a 20A FUSE
SOURCE: 1999 FORD CROWN VIC. 4.6 - PROBLEM, NOISE
This is caused by the IAC valve. Over time the valve becomes gummy and inoperative. Get it replaced and the problem is solved. IAC stands for idle air control, hence the stalling concern.
SOURCE: 92 crown vic - temperature guage on the dash is not working...
The temperature gauge sending unit is located in the front section of the intake manifold, just to the right of the alternator on the 4.6L engines. Got this from autozones repair manuals
SOURCE: 1999 ford crown vic with ignition coils going bad a lot.
have look at ur wires that is caming from the car in to the coil it self
Testimonial: "Thanks for the info. I did replace coils made in the good ol USA and the car is running much better. Better gas mileage as well. Thanks again."
63 views
Usually answered in minutes!
there is no ebrake on front.
×