Car is not starting but engine is cranking.when i put diagnostic machine,no fault.when i switch ignition key on,is engine light suppose to show up as the abs light,tire pressure light are doing
SOURCE: How do you turn off BMW X5 tire pressure light
On some X5's you can do it through the instrument cluster whereas other through the button on the centre console depending on the spec.
On the centre console you'll find the tpc button. It looks like a flat tyre with an exclamation. With the ignition turned off, press and hold this button and turn on the ignition to position 2. You'll notice on the instrument cluster the light go red, yellow, off and then come back on yellow. When the light comes back on yellow release the button and wait with the ignition on until the yellow tpc button goes out. Thats it.
If this hasnt worked you have a different spec and therefore a different way of doing it! Let me know and il guide you through it.
Hope this helps!
SOURCE: bmw 520i 1999 abs/asc lights on diagnostic
Check to see if your brake pads and rotors are in good condition. Or if you have replaced the pads yourself and have not reset the wheel sensors this would cause the ABS Antilock Brake System light and the ASC Automatic Stability Control light to stay on as the ASC uses the ABS brakes with computer assistance to control the car
SOURCE: 2003 X5 - TyreIndicatior Inactive shows on VDU.
Just double check the tyre pressure as per specification and reset the the Tyre Pressure Monitor system. Also make sure no Tyre punture on it.
SOURCE: I have 3 sensor lights
there area magnitude of things that can be the issue here. I wil take a chance here and say that there is an issue with a couple of sensors. This situation involves 1. The brake light sensor (which indicates that i brake light bulb is faulty) 2. The Tire pressure sensor (which is the tire pressure) and 3. ABS sensor ( Which i would associate it with a wheel speed sensor)
You should check the tire pressure, and correct it. Check the bulbs on your brake light and replace as necessary. Then check for a torn or broken ABS sensor, which are located on each wheel,
SOURCE: BMW E36 ABS WARNING LIGHT
i believe that the abs and esp are linked had the same problem on my x5 turned out to be steering angle sensor.
hope this helps
1,368 views
Usually answered in minutes!
×